User manual

12
• “NETWORK”
- “WIRELESS NETWORK CONFIGURATION”
Use this menu option to search for wireless access points and connect to a network. Refer to “Initial setup” and
follow the instructions for the “YES” option to connect to the desired network.
- “WIRELESS NETWORK (WPS PBC)”
Use this menu options to enable WPS and connect the radio to your router. Refer to “Initial setup” and follow the
instructions for the “YES (WPS)” option to connect to the router.
- “MANUAL CONFIGURATION”
If you cannot connect to the network automatically, try conguring the network settings manually.
You can choose whether to obtain an IP address automatically (DCHP).
If the SSID is hidden, enter the SSID manually.
You can also switch between saved Wi-Fi networks.
- “CHECK NETWORK WHEN POWER ON”
This sub-menu gives you the option to check the Internet connection when the radio is switched on.
When this feature is enabled, the network conguration menu will be automatically displayed if the radio
does not detect an Internet connection when it is switched on.
• “DATE & TIME”
- “SET DATE & TIME”
Here you can choose whether to set the date and time manually or automatically.
To manually congure the date and time, select the manual option and congure the settings using the
NAVIGATE/VOLUME control (10) and the
(4) and (5) buttons.
- “SET TIME FORMAT”
You can choose between 12 or 24-hour format.
- “SET DATE FORMAT”
Choose the desired date format. You can choose from the following options:
“YYYY/MM/DD” (year/month/day)
“DD/MM/YYYY” (day/month/year)
“MM/DD/YYYY” (month/day/year).
- “DAYLIGHT SAVING TIME (DST)”
Enables/disables automatic daylight saving time.