User manual

13
• “ALARM”
Refer to “Alarm” for detailed instructions on how to congure the alarm settings.
- “ALARM 1 (TURN OFF)”
Alarm 1 settings.
- “ALARM 2 (TURN OFF)”
Alarm 2 settings.
- “NAP ALARM (TURN OFF)”
This feature turns on the alarm after a preset duration (e.g. when you take a midday nap).
- “ALARM VOLUME”
Use this option to set the alarm volume. The volume settings apply to all alarms.
• “TIMER”
Use this menu to set a countdown timer.
Set the countdown time using the
(4) and buttons (5), and then press the NAVIGATE/VOLUME control (10)
to conrm your selection.
Press the NAVIGATE/VOLUME control (10) to pause and restart the timer.
An alarm will go off when the preset time has elapsed.
• “LANGUAGE”
Use this option to select the menu language.
• “DIMMER”
- “POWER SAVING”
Use this option to set the display brightness for standby mode.
- “TURN ON”
Use this option to set the power-on display brightness.
• “DISPLAY”
Use this option to congure the display colour settings (colour or monochrome).
• “POWER MANAGEMENT”
Use this option to set the power-off time. The Internet radio will automatically switch to standby mode after the
preset time if no buttons are pressed and/or there is no network connection.
• “SLEEP TIMER”
Use this menu to congure the sleep timer.
The radio will turn off automatically when the preset time has elapsed.
You can choose from the following sleep times: 15, 30, 60, 90, 120, 150 or 180 minutes.