User manual

• Make sure that the mains adapter connection cable is not jammed, bent or

damaged by sharp edges or otherwise mechanically stressed. Avoid excessive

thermal stress on the mains adapter cable from extreme heat or cold. Do not

modify the mains adapter. Otherwise the mains adapter may be damaged. A

damaged mains adapter can cause a deadly electric shock.

• Do not touch the mains adapter if it shows any damage. First, power down the

respective mains socket on all connections (e.g. via the respective circuit breaker

and FI switch) and then carefully pull the mains unit from the mains socket. Never

use the product if the mains unit is damaged.

• Never place containers containing liquids, e.g. glasses, buckets, vases or plants,

on the device or the mains adapter, or in its vicinity. Liquids may get into the

housing and impair electrical safety. This also poses great danger of re or

potentiallyfatalelectricshock!Ifthisisthecase,rstpowerdowntherespective

mains socket on all connections (e.g. switch off circuit breaker and FI switch) and

then pull the mains adapter from the socket carefully. Do not operate the product

anymore afterwards, but take it to a specialist workshop.

c) Batteries

• Keep batteries out of reach of children.

• Always keep batteries out of the reach of children. Otherwise, there is a danger

of them being swallowed by children or pets. If swallowed, consult a doctor

immediately.

• Remove the batteryfrom the remotecontrol's battery compartmentif you are

not using it for an extended period of time to prevent damage to the device by

leakage. Leaking or damaged batteries may cause alkali burns if they come in

contact with the skin. Therefore, use suitable protective gloves.

• Batteriesmustnotbeshort-circuited,takenapartorthrownintore.Thereisa

danger of explosion!

• Do not recharge normal, non-rechargeable batteries; danger of explosion!

Only charge rechargeable batteries intended for this purpose and use suitable

chargers.

• Always observe the polarity (positive/+ and negative/-) when inserting the battery.