User manual

8. Set-Up

When selecting the set-up location, please take into consideration the room layout such as the

whereabouts of the nearest socket, etc.

When selecting the set-up site, observe that direct sunlight, vibration, dust, heat, cold and

moisturemustbe avoided.There alsomust notbe anystrong transformers inthe device's

proximity.

Do not drill or screw any additional screws into the casing to mount the device. It would

damage the product.

 Makesureyoupositionthedevicesafely.Fallingdevicesmayposeasignicantrisk

of accident.

Due to the diversity of furniture paints and polishes used, it is possible that the

device's feet will leave visible residue onfurnituredue to chemical reaction. The

device therefore should not be placed on valuable furniture surfaces without any

suitable protection.

• Place the device on a level and stable surface.

• Completely pull out the aerial (14) and align it vertically.

• If reception is not satisfactory after connection and commissioning, change the alignment of

the aerial (14) or the site of setup of the device for best reception.

9. Commissioning

a) Port for the audio output

The DAB+ radio-adapter has cinch outputs for connecting an audio system or active speakers.

To avoid distortions or mismatches which could damage the device, only connect

devices with cinch or cable connections to the AUDIO OUT (13) port.

• Connect the AUDIO OUT (13) port to the inputs of the audio system or the active speaker.

red socket = right channel / white socket = left channel