Instructions

36
10. Operation
a) First time use
 Whenyouswitchonthedeviceforthersttimeorifyouhaverstresetittothefactorysettings,the
language selection and the following messages appear on the display once you switch it on. The start-up
process takes a few seconds.
Language selection
• Use the rotary knob (8) or the corresponding arrow buttons (16) on the remote control to select the desired language.
• Conrmyourselectionbypressingtherotaryknob(8)ortheOKbutton(26)ontheremotecontrol.
Conguring the Wi-Fi connection
Boot up and connect to
network
Configure Network?
< Yes > No
Welcome
• Select “YES” on the remote control using the LEFT (5) or RIGHT (6) or the corresponding arrow buttons (16).
• Conrmtheselectionbypressingtherotarydial(8)ortheOKbutton(26)ontheremotecontrol.
• Onthenextscreenselect“Add/RemoveAP”thenconrmtheselectionasdescribedabove.
Add/Remove AP
AP:[ ]
• Onthenextscreenselect“Add/RemoveAP(Scan)”thenconrmtheselectionasdescribedabove.
Add AP
Remove AP
(Scan)