Instructions

“RESUME PLAY OPTIONS”

Here, you can establish whether the device should revert to the last operation mode before it was switched off or

should start by displaying the main menu.

“POWER ON OPTIONS”

Here the following settings are possible for the reaction of the device after a voltage reset or power failure:

• Device goes into standby mode

• Device displays the main menu (home screen)

“DIMMER“

Here, the display settings and brightness can be set.

This menu point can also be accessed directly via the DIMMER button (31).

• This mode determines whether the display should dim after a period of non-use.

• The brightness setting determines the display brightness for dimmed and undimmed states.

The display brightness in Standby mode can be set manually by turning the rotary dial (8).

“EQ“

Here, tone settings for various music genres can be set.

“BUFFER TIME“

Setting buffer time for internet radio playback.

For playback of internet radio stations, the data is cached to avoid breaks in performance due to poor data

connection or short interruptions to data connection. If you have a poor internet connection, raising the

buffer time can contribute to interruption-free playback performance.

“INFORMATION“

Here you can access information on your network and your internet radio.

This menu point can also be accessed directly via the INFO button (32).

“SOFTWARE UPDATE“

Here, you can look for software update on the net and install them where required.

“RESET TO DEFAULT“

Here you can restore the internet radio to its factory settings.