User manual

b) DAB Operation
Station scan
• AfterrstselectionoftheDABmode,thedevicewillautomaticallyperformastationscanin
the DAB reception range.
• Thisstationscancanalsobestartedmanually.Forthis,keepthebuttonSCAN/ENTER(9)
pushed until the scan starts.
• The device will save the station found in the station list.
• During the search, the display shows progress and the number of stations found.
The clock will be set automatically as well during the station scan. The time will be
deleted after disconnection from the power supply. When restoring the power supply,
however, it will automatically set itself again.
If no stations are found, change the alignment of the aerial and/or change the site of
setup of the device and conduct the scan manually.
The station scan should be repeated after a change of location or now and then in
order to transfer new stations to the station list.
Station selection from the station list
• PushthebuttonsPREV(7)orNEXT(11),toselectthedesiredstation.
• ConrmyourselectionbybrieypushingthebuttonSCAN/ENTER(9).
Station storage
• The device can save up to 10 DAB stations.
• Select the other DAB station to be saved as described above.
• PressandholdthePRESET(6)buttonuntilthelistofthestationmemoryappearsinthe
display.
For empty station slots, no station name is displayed; if the station slot is already
occupied, the name of the station saved there is displayed.
• UsethebuttonsPREV(7)orNEXT(11)toselectthedesiredmemoryslotandconrmyour
selectionbybrieypushingtheSCAN/ENTER(9)button.
• To delete a saved station, just save another station on its storage space.
30