Manual

Table Of Contents

Dismantling Instructions

LED Table Lamp, Dimmable

Item no: 2867337

1 Dismantling recommendations

■

Disconnect from power supply.

■

Ask help from a professional if needed.

2 Dismantling instructions

Step 1

Use a screwdriver to loosen the 2 x screws.

Step 2

Use a scissor to cut the wire.

Step 3

Use the screwdriver to remove the plastic cover.

Step 4

Take out the LED module.

Step 5

The LED module is fixed to the aluminium radiator for SLR testing.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in

electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

This publication reflects the technical status at the time of printing.

*2867337_V1_0823_hs_en 978695051 I1/O1 en