User manual

37
f) Turning and swivelling direction/display alignment
Since the moving head can be set up or hung up, the rotating and swivel directions and the display align-
ment can be reversed accordingly.
Rotating direction PAN
• Select PAn in the menu.
• Push the button ENTER (6) and select the desired option with the buttons UP (5) and DOWN (4).
oFF = normal rotating direction
on = inverted rotating direction
• Press the ENTER button (6) to confirm your input.
Swivel direction TILT
• Select tIL in the menu.
• Push the button ENTER (6) and select the desired option with the buttons UP (5) and DOWN (4).
oFF = normal swivel direction
on = inverted swivel direction
• Press the ENTER button (6) to confirm your input.
Display Alignment
• Select dISP in the menu.
• Push the button ENTER (6) and select the desired option with the buttons UP (5) and DOWN (4).
oFF = normal display alignment
on = turned display alignment
• Press the ENTER button (6) to confirm your input.
g) Loading factory settings
After comprehensive changes to the configuration, it may be necessary to reset the device to factory set-
tings. For this, perform the following steps.
• Select rFAC in the menu.
• Select on with the buttons UP (8) or DOWN (9) and confirm your input with the button ENTER (6).
• The internal controller loads the factory settings.