User manual

ManualsBrandsRENKFORCE ManualsInterior DecoratingLED decorative light 3-piece set Candle LED White, Silver

Inserting/replacing the batteries

A battery is inserted into each lantern upon delivery.

When the battery in one of the lanterns is ﬂat, it must be replaced by a new one.

Proceed as follows:

• Rotate the cover of the battery compartment at the bottom of the lantern in anti-

clockwise direction until the arrow points to “OPEN“. Remove the cover of the bat-

tery compartment from the lantern.

• Take the ﬂat battery out of the battery compartment and dispose of it in an environ-

mentally friendly way.

• Insert a new type “CR2032“ battery into the battery compartment observing the cor-

rect polarity. The positive pole of the battery (marked with “+“) points outwards,

towards you.

• Close the battery compartment, insert the cover and turn it to the right in a clock-

wise direction into the position “OFF“.

Getting started

• The lanterns can be switched on or off by rotating the cover of the battery compart-

ment at the bottom (position “ON“ = switched on, “OFF“ = switched off).

The arrow at the edge of the lantern must point approximately to the centre

of each position.

• Position the stainless steel stand on a ﬂat, horizontal surface and place the lantern

in the opening at the top.

• Place the glass diffuser on the top of the stainless steel stand.

Never place a real candle (tea light) into the stainless steel stand. The glass

diffuser may burst! Risk of injury!

Do not use force when attaching the glass diffuser to the stainless steel

stand as the glass may break.

Maintenance and Cleaning

The product does not require any maintenance and should never be disassembled for

any reason. Any maintenance or repair work may be only performed by an authorised

repair shop.

Use a clean, dry, soft cloth for cleaning. Do not use aggressive cleaning agents, as

these can cause discolouration. Do not press too strongly on the surface when clean-

ing to prevent scratch marks; furthermore, the glass diffuser may break.

Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner.

Disposal

The product must not be disposed in the household waste.

Dispose of the product at the end of its serviceable life in accordance with

the current statutory requirements; e.g., return it to any suitable collection

point.

Technical Data

The following data apply to each individual lantern (3 pieces are included in

the delivery):

Power supply .............................................. 1x battery of type “CR2032“

Power consumption during operation .... approx. 10 mA

Illumination time ......................................... approx. 25 h

LED colour ................................................... amber (with ﬂickering effect)

Dimensions (Ø x H)..................................... 50 x 196 mm (stainless steel stand with glass

diffuser attached)

Operating Instructions

LED Lanterns, 3-piece set

Item no. 1083089

Intended use

The product is intended as decorative light indoors. The lanterns are battery-operated.

Each lantern has an amber-coloured LED that simulates the light of a real candle (or

lantern) by ﬂickering.

Always observe the safety instructions and all other information included in these op-

erating instructions!

This product complies with the applicable national and European requirements. All

names of companies and products are the trademarks of the respective owners. All

rights reserved.

Contents

• 3x lanterns (including a battery each)

• 3x stainless steel stands

• 3x glass diffuser

• Operating instructions

Safety Instructions

The warranty will be void in the event of damage caused by failure to ob-

serve these safety instructions! We do not assume any liability for any re-

sulting damage.

We shall not accept liability for damage to property or personal injury

caused by incorrect handling or non-compliance with the safety instruc-

tions. In such cases, the warranty will be null and void.

• The unauthorised conversion and/or modiﬁcation of the product is not

permitted for safety and approval reasons (CE).

• This product is not a toy and should be kept out of the reach of children!

• The product must not be exposed to extreme temperatures, strong vibra-

tions or heavy mechanical stress.

• Do not use this product in rooms that are under adverse environmen-

tal conditions where combustible gases, vapours or dust are or may be

present! There is a risk of explosion!

• Caution, LED light: Do not look directly into the LED light! Do not look into

the beam directly or with optical instruments!

• Do not leave packaging material carelessly lying around, since it could

become a dangerous plaything for children.

General Battery Instructions

• Batteries should be kept out of the reach of children. Do not leave batteries lying

around carelessly. There is a danger that children or pets may swallow them, dan-

ger to life! If they are swallowed, consult a doctor immediately.

• Make sure that batteries are not opened, short-circuited or thrown into a ﬁre. They

could explode.

• Make sure that the polarity is correct when inserting/replacing the batteries (pay

attention to plus/+ and minus/–).

• Old or used batteries can leak chemicals that can damage the device. Leaking or

damaged batteries may burn the skin if touched. Under these circumstances, pro-

tect your hands with suitable gloves.

• Only use a battery of the correct size and the recommended type.

These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.