User manual

27
12. Using the amplier
a) Basic operations
• PressthePOWERbutton(1)toswitchtheamplieronoroff.
• To increase the volume, turn the volume control wheel (8) clockwise or press the + button (16) on the remote
control.
• To decrease the volume, turn the volume control wheel (8) anticlockwise or press the - button (15) on the remote
control.
• To select the audio source, press the volume control wheel (8) or the MODE button (14) on the remote control. The
selected audio source will be shown on the input indicator (4).
 Whenusingtheremotecontrol,pointthefrontoftheremotecontrolattheIRreceiver(9)ontheamplier.
b) Playing music from a USB storage device
TheamplierfeaturesaUSBinterface(3)thatcanplayaudiolesonUSBstoragedevices(see“Technicaldata”for
detailsonsupportedleformats).
Do not connect battery-operated MP3 players to the USB interface (3). The power provided by the USB
interface (3) may charge the batteries and cause them to overheat or even explode.
The USB interface supports USB storage devices with a capacity of up to 32 GB.
The USB interface (3) only supports USB storage devices. Most MP3 players with a USB connection
automaticallyswitchtoPCmodewhentheyareconnectedtotheamplier.Musicplaybackisnotpossible
in this mode.
 SomeUSBstoragedevicesmaynotberecognizedbytheamplier.
 IfyourUSBstoragedeviceisnotrecognized,tryreconnectingittotheamplier.
• Insert your USB storage device into the USB interface (3).
• TheamplierwillautomaticallyswitchtoUSBinputandstartplayback.
• Press the button(6)ontheamplierorremotecontroltostartorstopplayback.
• Press the button(5)ontheamplierorremotecontroltoskiptotheprevioussong.
• Hold down the button (5) on the remote control to rewind the current song.
• Press the button(7)ontheamplierorremotecontroltoskiptothenextsong.
• Hold down the button (7) on the remote control to fast-forward the current song.