Information

- 1 -

Updating Firmware

You must own a PC to update the firmware. Sorry, Linux products are currently not supported.

Updating on Windows products:

1. You can contact your reseller to obtain the update firmware.

2. Important Note: Close all of other applications while running the firmware update. This will

insure the upgrade process will not be interrupted.

3. Launch the IP Tools application, and locate the device on your network. Reference Figure . Select the

Upgrade button to begin the firmware upgrade. As shown in this figure, the IP address of the device is

192.168.0.7. Make a note of your IP address (your results will vary).

Figure 1

4. Reference Figure 2. Select the Select File button, and browse to the location of the file

Figure 2

5. Select the Upgrade Firmware button. The dialog box will display Received a Read Request from

the device. A green progress bar will provide you with the upgrade status.

DO NOT OPERATE THE MOUSE OR KEYBOARD WHEN UPGRADING to prevent interruption of

PAGE 1
Updating Firmware You must own a PC to update the firmware. Sorry, Linux products are currently not supported. Updating on Windows products: 1. You can contact your reseller to obtain the update firmware. 2. Important Note: Close all of other applications while running the firmware update. This will insure the upgrade process will not be interrupted. 3. Launch the IP Tools application, and locate the device on your network. Reference Figure . Select the Upgrade button to begin the firmware upgrade.
PAGE 2
the upgrade. Figure 3 6. Once the firmware upgrade is complete, the dialog box will display Read session is completed successfully, as shown in Figure . Figure 4 7. Wait about one minute for the device to reboot. You can now Exit the upgrade window, and access the module again. You may be required to enter some settings, so check all of the panels for completeness.