Specification

ManualsBrandsRenogy ManualsElectrical12-Volt 170Ah Lithium-Iron Phosphate Battery for Solar Sanels Solar System

Renogy | www.renogy.com | techsupport@renogy.com | T: 909-287-7100 | F: 888-543-1164

www.renogy.com

BATT-LFP-12-170

Lithium Iron Phosphate Battery

Renogy Lithium Iron Phosphate Battery is perfect for deep-cycle

applications including electric vehicles, solar/wind energy system, UPS

battery backup, telecommunication systems, medical equipment, and

more.

Specifications

Electric

Characteristics

Nominal Voltage

12.8V

Rated Capacity (0.2C)

170Ah

Minimal Rated Capacity (0.2C)

165Ah

Energy

2176Wh

Specific Energy

103.6Wh/kg

Energy Density

149.1Wh/L

Internal Resistance

≤30mΩ

Cycle Life (0.2C, 20±5℃)

100% DOD 1500 cycles

Charging

Parameters

Charge Voltage

14.4 ± 0.2V

Maximum Charge Current

50A

Charge Cut-off Voltage

14.6V

Discharging

Parameters

Maximum Continuous Discharge Current

100A

Discharge Cut-off Voltage

≥10V

Temperature

Parameters

Operation Temperature Range

(60±25% R.H.)

Charge

0～45℃

Discharge

-10～50℃

Recommended

23±5℃

Storage Temperature Range

(60±25% R.H.)

Less than 1 year

0～25℃

Less than 3 months

-5～35℃

Mechanical

Properties

Dimensions

Length

347±3mm

Width

155±3mm

Height

270±3mm

Summary of content (4 pages)

PAGE 1
www.renogy.com BATT-LFP-12-170 Lithium Iron Phosphate Battery Renogy Lithium Iron Phosphate Battery is perfect for deep-cycle applications including electric vehicles, solar/wind energy system, UPS battery backup, telecommunication systems, medical equipment, and more. Specifications Electric Characteristics Charging Parameters Discharging Parameters Temperature Parameters Nominal Voltage 12.8V Rated Capacity (0.2C) 170Ah Minimal Rated Capacity (0.2C) 165Ah Energy 2176Wh Specific Energy 103.
PAGE 2
Weight 21kg Housing Material ABS+PC Terminal Model M12×14mm Cell Model IFR26650-3.4AH Assembly Method 4S53P Specification of Protection Circuit Module Protection Voltage (Single Cell) 3.80±0.05V Delay Time 0.5～2s Recovery Voltage (Single Cell) 3.50±0.05V Under voltage Protection Protection Voltage (Single Cell) 2.30±0.05V Recovery Voltage (Single Cell) 2.60±0.
PAGE 3
Rate Discharge Curve Different DOD Cycle Life Curves Gradient Discharge Curve Charging Characteristics Cycle Life Curve at 100% DOD Renogy | www.renogy.com | techsupport@renogy.
PAGE 4
Maintenance and Cautions ▪ ▪ ▪ ▪ ▪ Avoid over-discharging batteries Charge the batteries with recommended voltages, ensure the battery can be fully charged Generally, recharge capacity should be 1.1 ~ 1.5 * the discharge capacity The effect of temperature on cycle charge voltage: -4 mV / °C / Cell Length of cycle services is significantly affected by depth for discharge (primarily), along with ambient temperature, discharge rate, and the way the battery is recharged.