Instructions / Assembly

Wanderer10A/30A Installation Notes：
• The default starting position of the Wanderer controller terminal hatches are
closed (in the UP position ) that could mistakenly look like an open wire hatch.
• Make sure to FIRST lower each terminal hatch by screwing the terminals
counterclockwise to expose the wire terminal hatch to open position.
• THEN secure each cable by rotating the screws clockwise to the closed position.
Open position Closed position
Put cable here then turn the screw clockwise
Wanderer30A
Open position Closed position
Put cable here then turn the screw clockwise
Wanderer10A