Full Product Manual

DC Wiring

CAUTION: We recommend installing the inverter as close as possible to the

battery bank. The torque rating for the DC terminal is 12.5NM-20.5NM. The torque

rating suggested is 17NM.

Inverter

Cable Size (10 feet distance)

1000W

AWG 4-1/0

2000W

AWG 2/0

AC Wiring

WARNING: AC Output should NEVER be connected to public power or a generator.

CAUTION: When connecting to an AC source we recommend using 6-10AWG wire

and wiring just like the picture below. (120V Single Phase Wiring Only). Consult a

qualified electrician about specific wire gauge in terms of material and inverter

power.

AC Input: Ground-Hot Line-Neutral

AC Output: Neutral-Hot Line-Ground

Automatic Neutral-to-Ground Connection

CAUTION: Be careful of the positive and negative poles. Reversing the poles

might cause permanent damage to the inverter. It will surely blow the internal

fuse.

NOTE: Damage to the Renogy inverters due to reverse polarity is NOT covered by

warranty.