Eclipse Solar Suitcase Renogy 100W | 200W 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 Version 1.
Important Safety Instructions Please save these instructions. This manual contains important safety, installation, and operating instructions for the charge controller. The following symbols are used throughout the manual to indicate potentially dangerous conditions or important safety information. WARNING: Indicates a potentially dangerous condition. Use extreme caution when performing this task.
Table of Contents General Information ......................................................................................................................................... 3 Included Components .................................................................................................................................... 5 Identification of Parts ..................................................................................................................................... 6 Installation ......
General Information The Renogy Eclipse Solar Suitcase combine highly efficient monocrystalline solar panels with a 30A Adventurer charge controller to create an easy-to-use, ‘plug and play’ system. This system is specifically designed for mobile off-grid applications, where space and weight limitations are abundant. The Solar Suitcase models support 12V deep cycle battery varieties such as sealed-lead acid, gel, and flooded.
Four Charging Stages The Adventurer charge controller has a 4stage battery charging algorithm for a rapid, efficient, and safe battery charging. They include: Bulk Charge, Boost Charge, Float Charge, and Equalization. Bulk Charge: This algorithm is used for day to day charging. It uses 100% of available solar power to recharge the battery and is equivalent to constant current.
Included Components Remote Temperature Sensor Measures the temperature at the battery and uses this data for very accurate temperature compensation. The sensor is supplied with a 6.6ft cable length that connects to the charge controller. Battery Voltage Sensor Measures battery voltage accurately. The voltage detected at the battery terminals on the controller may differ from the real battery voltage due to the connection and cable resistance.
Identification of Parts 1 2 3 8 4 7 6 5 Key Parts 1. 2. 3. 4. 5. 6. 7. 8. 9.
1 2 3 4 5 6 7 7 Key Parts 1. 2. 3. 4. 5. 6. 7.
Installation 1. Unlatch and unfold unit then connect MC4 Connectors 2.
3.
Operation After connecting the battery to the charge controller, the controller will turn on automatically. Assuming normal operation, the charge controller will cycle through different display. They are as follows: Parameter Display PV Array Voltage PV 0.0 V Charging Current PV 0.0 A Generated Energy PV 0.0 kWh Battery Voltage BATT 0.0 V Battery SOC% BATT 0.0 % Temperature BATT 0.
Use the following buttons to cycle through the menu and change parameters SELECT Cycles forwards through the different display screens. ENTER Cycles backwards through the different select screens & Customize some parameters on the charge controller Programmable Parameters Simply hold the “ENTER” button for approximately 5 seconds until the display flashes. Once flashing, then press “SELECT” until the desired parameter is reached and press “ENTER” one more time to lock in the parameter. 1.
System Status Icons Icon Behavior Constant: System is normal, but it is not charging Charging: The bars will be sequencing indicating the system is charging. Constant: The battery is at full charge. Flashing: The battery is overvoltage. Flashing: The battery is under voltage. System Status Troubleshooting Indicator Description Troubleshoot Battery over voltage Flashing Flashing Use a multi-meter to check the voltage of the battery.
Maintenance For best controller performance, it is recommended that these tasks be performed from time to time. 1. Check that controller is mounted in a clean, dry, and ventilated area. 2. Check wiring going into the charge controller and make sure there is no wire damage or wear. 3. Tighten all terminals and inspect any loose, broken, or burnt up connections 4. Make sure readings in the LCD and LED are consistent. Frequently Asked Questions Q.
Technical Specifications Solar Panel Parameters Description Maximum Power Open Circuit Voltage (Voc) Short Circuit Current (Isc) Maximum Power Voltage (Vmp) Maximum Power Current (Imp) Cell Type Operating Temperature Folded Size Net Weight 100 W Parameters 100 W 21.6 V 6.10 A 17.6 V 5.68 A Monocrystalline −40°F to +185°F 21.1 X 21.5 X 3.1 in 19.40 lbs. 200 W Parameters 200 W 21.2 V 11.72 A 17.7 V 10.35 A Monocrystalline −40°F to +185°F 41.3 X 21.1 X 3.1 in 33.60 lbs.
Battery Charging Parameters Battery High Voltage Disconnect Charging Limit Voltage Over Voltage Reconnect Equalization Voltage Boost Voltage Float Voltage Boost Return Voltage Low Voltage Reconnect Under Voltage Recover Under Voltage Warning Low Voltage Disconnect Discharging Limit Voltage Equalization Duration Boost Duration GEL SEALED FLOODED 16 V 16 V 16 V 15.5 V 15.5 V 15.5 V 15 V 15 V 15 V ----14.2 V 13.8 V 13.2 V 12.6 V 12.2 V 12 V 11.1 V 14.6 V 14.4 V 13.8 V 13.2 V 12.6 V 12.
Boost Voltage—users should check with their battery manufacturer for proper charging parameters. In this stage, users set the boost voltage where the battery will reach a voltage level and remain there until the battery undergoes an absorption stage Float Voltage—once the charge controller recognizes the set float voltage, it will commence floating. The battery is supposed to be fully charged in his state, and the charge current is reduced to maintain battery stability levels.
Dimensions Adventurer 100W Eclipse Suitcase 17
200W Eclipse Suitcase Renogy reserves the right to change the contents of this manual without notice.
