E.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 03 FEATURES 03 PACKAGE CONTENTS 04 PRODUCT OVERVIEW 04 SPECIFICATIONS 05 OPERATIONS 05 TROUBLESHOOTING 08 WARRANTY 09 - 02 -
IMPORTANT SAFETY INSTRUCTIONS Please read the User Guide carefully before operating your E.FLEX 50. IMPORTANT SYMBOLS WARNING Indicates potentially dangerous conditions that could result in personal injury CAUTION Indicates conditions or practices that could result in damages to the unit or other equipment NOTE Indicates procedures or functions that are important for proper and safe operation of the unit and/or other equipment WARNING DO NOT disassemble the unit or remove any attached components.
OPTIMIZED CHARGING An intelligent chip automatically identifies connected devices and adjusts output current to offer the fastest possible charging speed. SUPERIOR DURABILITY Industrial-strength PET polymers and rugged polyester canvas provide lasting durability to protect against unpredictable weather conditions. PACKAGE CONTENTS 1 x Renogy E.FLEX 50 Portable Solar Panel 1 x MC4 to 5.5mm DC Adapter Cable 1 x 5.5mm DC to 5.5mm DC Power Cable 8 x 5.
1 Handle 6 MC4 Connectors 2 Pouch Bag 7 DC Output Port 3 Kickstand 8 USB-C Port 4 LED Indicator 1 9 USB-A Port 5 LED Indicator 2 10 Slide Switch SPECIFICATIONS General Weight 5.25 lb. / 2.38 kg Dimensions (Folded) 19.9 x 16.1 x 0.8 inch / 506 x 408 x 20 mm Dimensions (Unfolded) 32.5 x 19.9 x 0.2 inch / 826 x 506 x 5 mm Solar Panel Rated Power 50W Open Circuit Voltage 21.6V Short Circuit Current 3.04A Optimum Operating Voltage 18V Optimum Operating Current 2.
CAUTION Please place the PHOENIX 200/300 Power Station in the shade to prevent it from overheating. NOTE The E.FLEX 50 can charge rechargeable power supplies from other manufacturers as long as they accept 18V DC input. The included 5.5mm DC Adapter Connectors may be used with the MC4 to 5.5mm DC Adapter Cable to connect the E.FLEX 50 to the rechargeable power supply. Please follow the instructions provided by the manufacturer of the rechargeable power supply.
NOTE The USB-C Port of the E.FLEX 50 does not support the Power Delivery (PD) protocol and cannot charge USB-C laptops. To charge laptops, please first select the output voltage of the DC Output Port based on the voltage rating of the laptop. Slide the Slide Switch to the middle position for 16V DC output and the LED Indicator 1 will illuminate blue. Slide the Slide Switch to the right position for 19V DC output and both the LED Indicator1 and LED Indicator 2 will illuminate blue.
To expand the output power, please connect multiple E.FLEX 50 in parallel by joining the female and male MC4 Connectors of each E.FLEX 50 together with MC4 parallel branch connectors (not included). CAUTION DO NOT connect multiple E.FLEX 50 in series. Doing so may cause irreversible damage to the E.FLEX 50. TROUBLESHOOTING If the E.FLEX 50 does not charge the device connected to it, please check the connection between the E.FLEX 50 and the device.
WARRANTY RENOGY products are covered by a 12-month limited warranty from the original purchase date. If any problems occur, please contact us for assistance. Refer to the last page of User Guide for contact information. We only provide after-sales services for products that are sold by RENOGY or retailers and distributors authorized by RENOGY. If you have purchased your unit from other channels, please contact your seller for more information about return and warranty.
RENOGY.COM Renogy reserves the right to change the contents of this manual without notice. US 2775 E Philadelphia St, Ontario, CA 91761, USA 909-287-7111 www.renogy.com support@renogy.com CN 苏州高新区科技城培源路1号5号楼-4 JP https://www.renogy.jp supportjp@renogy.com CA https://ca.renogy.com supportca@renogy.com AU https://au.renogy.com supportau@renogy.com UK https://uk.renogy.com supportuk@renogy.com DE https://de.renogy.com supportde@renogy.com 400-6636-695 https://www.renogy.cn support@renogy.
