Quick Guide

18
Operation
The battery charger is simple and easy to use. The plug & play design makes the installation
easier, and the knob with 5 gears makes the selection of battery type more convenient.
The default battery type of the battery charger is AGM/SLD. After the wiring of the battery charger
output is completed, please manually set the battery type according to the usage needs.
input output
DC-DC Battery Charger
USER mode Lithium Battery Flooded Battery Gel Battery AGM Battery
User Mode requires the addition of the Renogy DC Home app customize charge parameters.
Please scan the QR Code on the last page of the Quick Guide to download the app.
Maintenance
For optimum performance, it is recommended to perform these tasks regularly.
z
Ensure the battery charger is mounted in a clean, dry, and ventilated area.
z
Ensure there is no damage or wear on the cables.
z
Ensure the firmness of the Anderson connectors and check if there are any loose, damaged
or burnt connections.
z
Make sure that the Battery indicator and Fault indicator are in normal state.
z
Ensure there is no any corrosion, insulation damage, or discoloration marks of overheating or
burning.
z
Risk of electric shock! Make sure that all power is turned off before touching the terminals on
the battery charger.
z
Please refer to the user manual of the battery charger at renogy.com for more details.
Operation & Maintenance