Quick Guide

0606
Installation
Mounting Location
z
Risk of explosion! Never install the battery charger in a sealed enclosure with flooded
batteries! Do not install in a confined area where battery gases can accumulate.
z
Place the battery charger on a vertical surface protected from direct sunlight, high
temperatures, and water. Make sure there is good ventilation.
z
The battery charger requires at least 6 inches (150mm) of clearance above and below for
proper air flow. Ventilation is highly recommended if mounted in an enclosure.
z
If the Battery Adapter Cable or Solar Panel Extension Cable is not long enough, you can use
more extension cables or reselect the position where the battery charger needs to be secured.
DC-DC Battery Charger
STEP-1.1
≥150mm
≥5.91inch
≥150mm
≥5.91inch
DC-DC Battery Charger
STEP-1.2
Confirm the installation
location.
Measure the length of the cables connecting to the battery and
solar panel so they can be connected to the battery charger.