BT-1 BLUETOOTH MODULE Bluetooth Module for Solar Charge Controllers Version 2.
General Information The Renogy BT-1 is a great addition to any compatible Renogy solar charge controllers. Powered by its RJ12 communication port, the BT-1 provides wireless monitoring of system data and allows users to change parameters through the Renogy DC Home smart phone App.
Key Features Wirelessly monitor and control compatible solar charge controllers via Bluetooth Connects to our user-friendly smart phone App, Renogy DC Home, to keep track of your system Embedded exclusive Bluetooth chip with high efficiency and low energy consumption Bluetooth 4.
Identification of Parts Mounting Hole Power Indicator Communication Status Indicator Product Model 03 Communication Cord
RJ12 Port 04
To Download App 1. The Android version of the Renogy DC Home APP is available to download on Renogy.com and the Google Play Store. In the Google Play Store, simply search “Renogy DC Home” in App store to download. 2. For IOS version, simply search “Renogy DC Home”in App store to download.
Operation Connection Connect the BT-1 Bluetooth module to any Renogy solar charge controller with an RJ12 port and RS232 communication protocol.
Communication status indicator Green Power Indictor: Power Indicator Status Note Solid (Green) Power On Off Power Off Blue Communication Indicator: Link Indicator 07 Status Note Flashing (Blue) Communicating Off Stand by
Compatible Models All Renogy Controllers with RJ12 port Compatible Models RNG-CTRL-ADV30 RNG-CTRL-WND10 RNG-CTRL-WND30LI RNG-CTRL-WNDPG10 RNG-CTRL-RVR20 RNG-CTRL-RVR30 RNG-CTRL-RVR40 RNG-CTRL-RVR60 RNG-CTRL-RVR100 Communication Protocol RS232 Port Type RJ12 08
How to Connect Via Renogy DC Home App: 1.First-time users of the Renogy DC Home App will need to create an account. If you have an existing Renogy.com account, you can use those same credentials.Otherwise, you will need to register a new account.
2.After logging in successfully, you need to add your device. You can do this by clicking the blue plus button located on the upper right corner or by tapping the blue “+Add devices” link at the bottom of the screen.
3.An Operation Guide will pop up. Follow the directions by turning on your device’s Bluetooth and then selecting “Next”. After confirming your connection, tap the checkbox and then select “Next”. The App will now look for the device.
4.When a device is found, select the Bluetooth device, then name the device if you wish.Afterwards, press “Next” and then select the type of device you are connecting. In this example, we will select Charge Controller.When successful, the App will confirm the product SKU. If the SKU is correct, click“OK” to start communicating with your Rover 30Amp.
5.In the main interface, you can see the general parameters of the charge controller under “my devices” section.
Technical Specifications Description Model Parameter BT-1 Standby Power Consumption 0.04W Operating Power Consumption 0.05W Communication Range ≤82ft（25m） Serial Baud Rate Fixed Baud Rate 9600bps Communication Protocol RS232 Port Type RJ12 Cable Length 5.00m (16.4ft) Dimensions 67.3 X 35 X 14mm 2.65 X 1.38 X 0.55in Installation Dimensions 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature -20℃~85℃（-4°F to 185°F） Protection Grade IP54 Weight 130g(4.
FCC Compliance Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. （3）FCC 20cm Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf.
RENOGY.COM Renogy reserves the right to change the contents of this manual without notice. US CN JP CA https://ca.renogy.com supportca@renogy.com AU https://au.renogy.com supportau@renogy.com 400-6636-695 https://www.renogy.cn support@renogy.cn UK https://uk.renogy.com supportuk@renogy.com https://www.renogy.jp supportjp@renogy.com DE https://de.renogy.com supportde@renogy.com 2775 E Philadelphia St, Ontario, CA 91761, USA 909-287-7111 www.renogy.com support@renogy.
