Manualshelf

User Manual

ManualsBrandsRenogy ManualsEnergy ControllersAdventurer Li 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller w/ LCD Display with Bluetooth Module, Compatible with Sealed, Gel, Flooded and Lithium Batteries
11121314151617181920
12
If unscrewing the Battery Voltage Sensor terminal block, make sure to not mix the wires.
It is polarity sensitive and may cause damage to the controller if connected incorrectly.
WARNING
EN
4. Insert the battery voltage sensor terminal block in the Batt Remote port. This is
polarity sensitive. (Optional, requires a separate purchase).
Operation
After connecting the battery to the charge controller, the controller will turn on
automatically. Assuming normal operation, the charge controller will cycle through
different display. They are as follows:
Parameter Display
PV Array Voltage
0.0
V
Charging Current
0.0
A
Generated Energy
0.0
kWh
Battery Voltage
0.0
V
Temperature
0.0
F
0
PV
PV
PV
BALL
BALL