Installation Guide

SM
SOLAR
MOUNT
INSTALLATION GUIDE
PAGE
MIDCLAMP: Rotate midclamp assembly and slide
until clamp is against module frame. Do not tighten
nut until next module is in position. Ensure bolt is
perpendicular to rail.


INSERT MIDCLAMP ASSEMBLY: Insert 1/4" T-Bolt into
top slot of rail


INSTALL MIDCLAMPS: Midclamp is supplied as an
assembly with a T-bolt for module installation.
Clamp assemblies may be positioned in rail near
point of use prior to module placement.
BONDING MIDCLAMP
L
PLACE ADJACENT MODULE AGAINST CLAMPS:
Modules must be tight against clamps with no gaps.
Tighten nut to required torque.
TORQUE VALUE (See table and notes on PG. A)
11 ft-lbs. No anti-seize.
POSITION INDICATOR - SERRATED T-BOLT:
Verify the T-bolt position indicator is perpendicular
to the rail.
