Installation Guide

SM
SOLAR
MOUNT
INSTALLATION GUIDE
PAGE
REMAINING MODULES
M
INSTALL REMAINING MID-CLAMPS:
Proceed with module installation.
Engage each module with previously
positioned Midclamp assemblies.
FINISH MODULE INSTALLATION: Proceed with module installation.
Engage each module with the previously positioned clamp assembly:
POSITION T-BOLT ALIGNMENT MARKS:
Verify that the position indicator(s)
& T-bolt shaft(s) are angled in the
correct position. Tighten to nal
torque.
TORQUE VALUE (See table and notes
on PG. A) 11 ft-lbs. No anti-seize.





















