Installation Guide
SM
SOLAR
MOUNT
System Certification
PAGE
APPENDIX A
C
• The frame prole must not have any feature that might interfere with the bonding devices that are integrated into the racking system
• Use with a maximum over current protection device OCPD of 30A
• Please see the SM UL2703Construction Data Report at Unirac.com to ensure the exact solar module selected is approved for use with SM
• Listed models can be used to achieve a Class A re system rating, for steep slope applications, only with module re typed 1, 2, 3, or 10. See appendix A, page A
Manufacture Module Model / Series
Manufacture Module Model / Series Manufacture Module Model / Series
Seraphim SEG-6 & SRP-6 Series
Sharp NU-SA & NU-SC Series
Silfab SLA-M, SLA-P & SLG-M, SLG-P Series
Solaria PowerXT
Solartech STU HJT, STU PERC & Quantum PERC
SolarWorld Sunmodule Protect, Sunmodule Plus/Pro
Suntech STP
Suniva MV Series & Optimus Series (35mm)
Sun Edison F-Series, R-Series
SunPower AC, X-Series, E-Series & P-Series
Electrical Bonding and Grounding Test Modules
The list below is not exhaustive of compliant modules but shows those that have been evaluated and found to be electrically compatible with the SOLARMOUNT system.
Talesun
TP572, TP596, TP654, TP660,
TP672, Hipor M, Smart
Tesla SC, SC B, SC B1, SC B2
Trina
PA05, PD05, DD05,
PD14, PE14, DD14, DE14
TSMC TS-150C2 CIGSw
Upsolar UP-MxxxP, UP-MxxxM(-B)
URE
D7MxxxH8A, D7KxxxH8A,
D7MxxxH7A, D7KxxxH7A
Vikram Eldora, Somera, Ultima
Vina
VNS-72M1-5-xxxW-1.5,
VNS-72M3-5-xxxW-1.5,
VNS-144M1-5-xxxW-1.5,
VNS-144M3-5-xxxW-1.5,
VNS-120M3-5-xxxW-1.0
Winaico WST & WSP Series
Yingli YGE & YLM Series