Full Product Manual

Operation

After connecting the battery to the charge controller, the controller will turn on

automatically. The user will be prompted by an initialization screen, followed by the

charge controller’s rated parameters, and finally the default monitoring screen.

Use the following buttons to maneuver through the menu:

Cycle through the menu

Return to main menu in any monitoring interface

Modify any value and set period of Log to browse

Selecting certain parameters

Select to display the menu screen selection. The user will have 9 interfaces to

choose from.

1. Monitoring

2. Log Info

3. Clock Set

4. Local Para Set

5. Control Para

6. Sys Password

7. Default Set

8. Device Msg

NOTE: You might be prompted to enter a password. Simply put “0” all the way

through by pressing

NOTE: To customize charge parameters, BATT TYPE must be set to USER under

5. Control Param





ESC

Rated Parameters

Rat.Volt 48.0V

Charg.Cur 60.0A

Disc.Curr 60.0A

ESC