Full Product Manual

18
NOTE: The values found in your controller are default values and will not
necessarily match the ones listed. The values on this table are to show the user
what the different screens are used for.
NOTE: You do NOT have to program the control. These parameters are for extra
features. Once you connect the battery the settings are automatically synced.
1. Monitoring
Use the keys to maneuver through the screens and to access the
menu
Default monitoring screen displaying charge controller
system status through icons.
Indicates battery voltage and battery current
Indicates the maximum and minimum battery values
since the charge controller has been turned on. When
battery is charging, the values are expected to
change.
Displays the battery state as well as the state of
charge of the battery.
Displays the charging state of the battery as well as
the voltage coming from the PV module(s).
NOTE: Make sure PV input is not more than 150 VDC

Charge State
No Charge
PV Volt
0.0 V

Batt State
Normal
Batt SOC
51%

Batt Day’Max
12.8 V
Batt Day’Min
12.6 V

Batt Volt.
12.6 V
Batt Cur.
0.0 A

0.00A 12.65V 0.00A
Jan 12:12: 12
10


ESC