Full Product Manual

ManualsBrandsRenogy ManualsAlternative Energy Solutions60 Amp Commander MPPT Solar Charge Controller

NOTE: In some models, users might be prompted to

enter a password. Simply put “0” all the way through

and press OK.

5. Control Para Set

Use the keys to maneuver through the screens and to access the

Press to highlight the parameter and use the keys to change the

parameter. Press to confirm and save the settings.

Choose between SEALED, FLOODED, GEL, or

USER for Battery type.

Indicates Temperature Compensation. Temperature

fluctuation can affect performance in the system.

Therefore, the purpose of temperature compensation

is to adjust the performance of the system to keep the

system functioning normally.

Choose 12V, 24V, 36V, 48V or AUTO for Rated

voltage.

Parameters for Over-Voltage Disconnect and

Charging Limit.

Parameters for Over-Voltage Reconnect and

Equalization Charge Voltage

Parameters for Boost Charge and Float Charge

voltage

Boost Charge

14.4 V

Float Charge

13.8 V



Over Volt. Rect.

15.0 V

Equalize Charge

14.6 V



Over Volt. Disc.

16.0 V

Charge Limit

15.0 V



Temp Coefficient

-3mV / C ° / 2V

Rated Volt

AUTO



Batt Type

SEALED

Batt AH

10 AH





ESC