Full Product Manual

23
6. Sys Password
Use the keys to maneuver through the screens and to access the
Menu
Press to highlight the parameter and use the keys to change the
parameter. Press to confirm and save the settings.
Setting a password for the controller prohibits the user
from programming the controller unless the password
is set.
NOTE: Default Password is “000000” if it prompts the
user to enter a password before they set one.
7. Default Set
Use the keys to maneuver through the screens and to access the
Menu
Press to highlight the parameter and use the keys to change the
parameter. Press to confirm and save the settings.
This interface restores the charge controller to factory
settings which is mainly for user parameters that might
have been set. The second option is to clear the Work
Log which the controller has been keeping track of
thus far.
NOTE: Once parameters are reset, they cannot be
recovered.
8. Dev Msg
This screen provides information regarding the model
type of the charge controller. It includes the model,
software, and SKU number.
Sys Password
Ori.PSW: 000000
NewPSW: 000000
Default Set
No Yes
Clr Log Record
Retain Clear
DSP Msg.
Type: IT6415ND
Ver: v01.00+v02.60
SN: 0420131210000001

ARM Msg.
Type: IT6415ND
Ver: v01.00+v02.60
SN: 0420131210000001
OK
+
-
OK


ESC
OK
+
-
OK


ESC