Phoenix User Guide V2.
AC Charge Cord MC4 to 4.5mm DC IN Cord CIG to 4.5mm DC IN Cord 5.5mm DC to Light Bulb Socket Be sure to charge your Phoenix to 100% before operating. This will maximize total battery life and keep your battery healthy For healthy battery maintenance, charge the Phoenix once every two months. If the Phoenix will not be used for an extended period of time, such as a month, remove the battery and properly store it until the Phoenix is in use again.
Charging is also possible through compatible additional solar panels and using the MC4 to 4.5mm DC IN cord included with your Phoenix. The following represents approximate charge times from 0% to 100%. CHARGING VIA AC OR WALL CHARGING VIA AC Electrical shock can occur if the AC cord is damaged or frayed. NEVER use a damaged cord. Contact the manufacturer if the cord is damaged.
8 The number of bars demonstrate the strength of the solar irradiance ranging from 0 to 4 bars.
USING THE FLASHLIGHT The Phoenix is equipped with a 3W LED Flashlight that encompasses different modes: Head Light, Dimmer Head Light and Flashing. Press the flashlight button once to activate the head light mode. Press the button again to activate a dimmer Head Light. Press the button a third time to activate Flashing mode and press the button again to turn off the flashlight USING AC OUTPUT The AC outlet is powered using the Phoenix’s internal pure sine wave inverter.
Technical Specifications For further questions, consult our technical support team by emailing us at techsupport@renogy.com or by calling 800-330-8678. 1.Why won’t my Phoenix turn on? Press the metal power button to turn the Phoenix on. The blue lit ring around the power button indicates the Phoenix is ready to power. If the blue lit ring is not visible, make sure to fully charge your Phoenix using the provided AC cable or through the integrated solar panels.
