Installation Guide

13
The following tools and equipment are highly recommended to have available to assist with
installation but are in no way a comprehensive list of tools that can ease installation. Installers
feel free to substitute comparable equipment where appropriate.
Image
Component
Description
Ratchet/Torque
Wrench
Allows for tightening of fasteners.
Torque wrench allows for careful
monitoring of torque value to prevent
overtightening.
6mm Socket
Drive
Used with ratchet to tighten down
bolted joint between panel and Z-
Bracket.
5/32” Socket
Drive
Used with ratchet to drive screw into
mounting surface and secure Z-
bracket to it.
Center Punch
Indents mounting surface to reduce
screw wandering during initial drive.
Crescent
Wrench
Used to prevent rotation of the nut
during joint tightening until split lock
washer has effectively engaged.
Tape Measure