How to Guide

3
Important Safety Instructions
Please save these instructions.
This manual contains important safety, installation, and operating instructions for the
unit. The following symbols are used throughout the manual to indicate potentially
dangerous conditions or important safety information.
WARNING: Indicates a potentially dangerous condition. Use extreme caution
when performing this task.
CAUTION: Indicates a critical procedure for safe and proper operation of the
controller
NOTE: Indicates a procedure or function that is important to the safe and proper
operation of the controller.
General Safety Information
• Read all instructions and cautions in the manual before using the tool.
• Do NOT attempt to disassemble MC4 connections with alternative tools. Doing so may
damage the connections and/or the connectors.
• If using MC4 connectors not supplied by Renogy, this tool may not work for those
connectors.
General Information
The Renogy MC4 Assembly Tool is designed to make the assembly and disassembly of
MC4 connections quick and easy. This tool can assist in the connections/disconnection
of the MC4 connectors from one another or assist in the addition/removal of another
MC4 connectors from a bare wire. This unit is made of a hard plastic material that is
strong enough to provide sufficient leverage for operation, while simultaneously
preventing fracture or marring of MC4 connector and its surfaces.
Key Features
• Hard plastic
• Easy assembly and disassembly of MC4 connectors
• Quick disconnect for existing MC4 connections