DM-1 Data Module RENOGY Data Module for Solar Charge Controllers TM
General Information The Renogy DM-1 is a new generation of data module for Renogy solar charge controllers. The DM-1 provides wireless monitoring of the system data and sets up operating parameters through smart phone App.
Additional Components Additional components included in the package: Communication Antenna GPS Antenna Power Cable RJ12 Data Cable 02
Operation Connection Step 1 Connect communication antenna and GPS antenna to the ports. Step 2 Connect RJ12 data cable to charge controller.
Step 3 Connect power cable to load terminals of the charge controller. If the controller doesn’t have load terminals, alternatively connect power cable to battery terminals. However, for the best performance, it is suggested to connect power cable to load terminals.
Technical Specifications Communication status indicator LED Indicator Status Note Power On Power on Net Flashing Working Work Flashing Working Compatible Models Compatible Models Communication Protocol Port Type 05 All Renogy Controllers with RJ12 port RS232 RJ12
Description Model Input Voltage Range Input Current Operating Temperature Operating Humidity Battery Capacity Communication Protocol Port Type Power Cable Length RJ12 Data Cable Length Communication Antenna Length GPS Antenna Length Dimensions Weight Protection Grade Parameter DM-1 9V to 100V DC <60mA (DC 12V) -20℃ ~ +70℃ 20% ~ 95% 3.7V / 280mA RS232 RJ12 2 m (6.6 ft) 1.5 m (4.9 ft) 2 m (6.6 ft) 2 m (6.6 ft) 94 x 100 x 25 mm (3.70 x 3.94 x 0.98 in) 0.21kg(0.46lb) IP30 TO DOWNLOAD APP: 1.
2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 Renogy reserves the right to change the contents of this manual without notice.