Owner's manual

Renovators Supply, Inc.
c
ADA
compliant
Wall-Mount Sink Installation
Note: Large sinks are heavy, get help lifting the sink
Level
Finished
Wall
Level
Washer
Lag Bolt
Finished
Wall
Anchoring
Holes
Washer
Lag Bolt
Finished
Wall
Anchoring
Holes
Lift and place the sink against the wall
ensuring it is level. Mark the sink’s
anchoring hole locations with a pencil.
Note: For adequate wall support,
ensure that the backing behind the finished
wall is sufficient to secure the sink bolts.
Carefully lift and position the sink against the wall.
Install rubber washers, nut and bolts. Hand tighten,
ensuring the sink is level. Secure bolt and nuts.
These instructions and drawings disclose confidential and other data of proprietary nature owned by Renovator's Supply Inc. and
may not be used or disclosed to others without the prior written consent of Renovator's Supply, Inc.
Renovator's Supply, Inc.
c
For recommended ADA Installation see suggested diagram below.
For more information on ADA installation guidelines visit:
• http://www.access-board.gov/adaag/about/aiacourse/ADAAG/Adaag.htm