Smart Body Composition Scale Model: ES-CS20M ES-24M ES-26M ES-32MD
RENPHO Bluetooth Scale User Manual Thank you for choosing RENPHO! This scale is your personal health assistant.
1. To avoid slipping, do not weigh with wet feet. 2. "Lo" symbol on the display indicates that the battery power is low. Please replace the batteries. (If it is not used for a long time, please remove the battery to avoid battery leakage.) 3. Avoid hitting or dropping the scale as it is a highly precise electronic instrument. 4. Do not expose to excessively wet environments.
FCC Warranty This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Caution When using digital scale, certain basic safety precautions must be followed, including the following: 1. The Bluetooth scale should not be used to diagnose or treat any medical condition. You should consult a doctor when undertaking any diet or exercise program. 2. If you are pregnant or have a pacemaker or other internal device, you should not over rely on the data provided by this product. All data is for reference and is not a substitute for advice from a licensed health care professional. 3.
Specifications ES-24M Model ES-CS20M Size(inch) 11x11x1 Weight 2.86lbs/1.3kg ES-26M 10.2x10.2x0.91 10.2x10.2x0.91 2.43lbs/1.1kg ES-32MD 11x11x1 2.43lbs/1.1kg 2.86lbs/1.3kg Batteries 3*1.5V AAA Capacity 6.6-396lbs/3-180kg Division 0.2lb/0.05kg Unit Lb/kg/st ( Switch via RENPHO App in the Settings) Accuracy Range 50kg:±0.3kg 100kg:±0.4kg 150kg:±0.5kg 110lbs:±0.66lb 220lbs:±0.88lb 330lbs:±1.
For body weight: Place the scale on an even surface, step on the scale with one foot until the LED screen lights up. Then step off and wait for the LED screen to display "CAL". When "0.00 kg/0.00 lb" is displayed, the scale is calibrated and you can step on it for measurement. For body fat and other body composition analysis: Stand straight on scale and uniformly touched the electrodes with bare and dry feet as shown below.
Download App and install the batteries 1. Download "RENPHO" via App Store or Google Play. 2. Sign up for a new RENPHO account. 4. Install original battery set, please note the batteries offered are trial version, please replace them within 2 months in order to avoid leakage and damage the scale. 3. Then add required data and confirmed OK.
Pairing the RENPHO scale with your smartphone Turn on Bluetooth on your smartphone. Location also needs to be turned on for Android 6.0 or higher.(Required by Android System) 1. Press [+] and Device management to be redirected to pairing your devices. 2. Step onto the scale with dry and bare feet. Tap the device name on the pairing page. 08 3. Remain standing on the scale for 5-10 seconds. The weighing is finished after "000" has displayed twice.
Bluetooth Connection If the regular connection to Bluetooth failed, please try the below steps: 1. Reset the scale for taking out one battery for 5 seconds and putting it back in. 2. Reset the Bluetooth connection. Turn on Bluetooth on your Smartphone. Location also needs to be turned on for Android 6.0 or higher.(Required by Android System) > Open the RENPHO App. > Under the "Measurements" section, select the top right "+". > Select "Device Management".
View reports, deleted data, download CSV, set reference data, share progress Click "Chart" to view your progress history. Enter it into the calendar to form a list and select a data or all data you want to delete. You can also download and send the data to your email address in CSV format.
At the bottom, you will find a bar where you can select different types of data to display. You can share your fitness data with friends via Facebook, Instagram, or SMS by clicking the share button and share on the Measuring page.
How to delete data? 1. Tap on the "Trends" icon (bottom center of main screen), then choose the right corner on top. Tap on the "Select Data". 2. Tab, or click on any point in the chart to view details. 12 3. Select a calendar date or select any data that you want to delete. Tap on "Delete" to remove the selected data.
Add/Delete Users & Basic Settings Under "My Account" you can add user(s) To delete an account, swipe the account to the left and select "Delete". Themes, Set goals, Weight units, Measurements Sounds, Languages, Passwords can all be set under the Setting " " page. Please note that you can change the weighing unit under "My account ＞Settings ＞Weight Unit".
Syncs to Fitness App 1) Tap on the "Settings" icon " " at the top right corner of the "My Account" screen. 2) Under "Settings", tap on "Samsung Health". 3) After you log in your Samsung Health account, please go back to the Authorization page. Now please switch on the "Samsung Health" button again, then it will pop up the specific information to access authority, ensure all permissions are enabled, then click confirm. Try using the App again. Data from the RENPHO App should now sync with Samsung Health.
1) Open the "Health" App on your iPhone, select "Data Sources". 2) Select "RENPHO" from the sources list. 3) Turn on all categories to allow the RENPHO App to work. For iOS Newest software version, please take the following steps to sync data in RENPHO App to Apple Health. 1) Open the "Health" App on your iPhone, click the user image at the right corner. 2) Click the "Apps" under Privacy, select "RENPHO". 3) Turn on all Categories to allow the RENPHO App to work.
1) Enter Setting " " page, select "Google Fit". 2) Turn on "Google Fit" button, login to your Google account. 3) It will now automatically redirect you to the "Google Fit" page. 4) After the connection has been established, the data "weight" will sync to Google Fit.
Apple Watch Using the Apple Watch with your Renpho scale. Before you can use the Renpho scale on your Apple Watch, ensure you have the Renpho App downloaded on your phone and you have the scale paired with the Renpho app on your phone first. Once that is done, you can use the Renpho scale on your Apple Watch with the following steps. 1) Install and open the Renpho Apple Watch App. On the main interface, tap "Measuring". 2) Step onto the scale and stand still.
4 5 1. The Renpho Apple Watch is only available in English for now, please stay tuned for other languages. 2. You can use the Apple Watch with your smartphone under these following conditions: When the Apple Watch is disconnected with smartphone. When the watch is offline (i.e. it is not connected to WiFi). When the Apple Watch is offline and disconnected with smartphone, after restarting the watch. 3. To use the Renpho Scale, ensure your Watch has iOS 4.0 or above. 4.
1) Enter Setting " " page, select "Fitbit". 2) Turn on "Fitbit" button, login to your Fitbit account. 3) Select "Allow" to access Fitbit App. 4) After connection, the data (Weight, Body Fat%, BMI) will sync to Fitbit App. You can view both on App and web.
Frequently asked questions & answers 1. How to get the most accurate result? - Stand on the scale firmly, do not shake your body when weigh in. - Lake your measurement at the same time each day to ensure the most accurate results. Please place your scale on the hard/flat ground, then step on the scale with bare feet, then the display will be turned on. And the warm tips before using the scale: - Check your profile information (gender, age and height), make sure all the data is accurate.
4. I saw "Athlete Mode" option when I create my profile, what is it? Should I open it ? What is the definition of an Athlete? - The general consensus among researchers is that a quantitative dimension could be used to define an athlete. An athlete is defined for this scale as a person who consistently works out for approximately 3 times per week at 2 hours for each occurrence. These individuals should select Athlete Mode for the most accurate measurement results.
For more information, please check RENPHO App. "My Account > FAQ" What’s Included? Your RENPHO Bluetooth scale box included: RENPHO Bluetooth scale Batteries: 3*1.
JOICOM CORPORATION 165 E. Freedom Ave., Anaheim, CA 92801 Email: support@renpho.com (US) Tel: 1-(844)-417-0149(US) EC REP EU Representative: BellaCocool GmbH Address: Pettenkoferstraße 18, 10247, Berlin, Germany Email: support-eu@renpho.
