AI-POWERED EXERCISE BIKE USER MANUAL Model: R-Q002 Please read this manual carefully before using the bike and keep it for future reference.
THANK YOU FOR CHOOSING RENPHO POWER EXERCISE BIKE This is an AI-Powered Exercise Bike tailor-made for home use. It is inbuilt with intelligent motor damping, known as the black technology for cyclist training, which provides two very different, yet both scientific training modes-constant resistance and constant power.
WARNINGS 1. Children under the age of 14, persons with reduced physical, sensory or mental capabilities, as well as persons with a lack of knowledge must be given supervision or instruction before using the bike. DO NOT allow children to perform maintenance without supervision or to play with the bike. 2. This adapter has passed CQC certification and can be used with this bike only. Do not use it with any other products.
IMPORTANT SAFETY INSTRUCTION Read all safety information before operating the bike. It is the owner’s responsibility to ensure that users are aware of all warnings and precautions. 1. The bike is for home use only. 2. Please correctly connect the power adapter before use. 3. To avoid injury, warm up before using the bike. 4. Incorrect or excessive training can result in serious injury. 5. To avoid accidents, keep the bike out of the reach of children and pets. 6.
PRODUCT INTRODUCTION 1 2 3 4 18 17 5 16 6 15 7 8 14 9 13 10 12 11 10. Transport wheels 11. Leveling feet 12. Rear stabilizer 13. Power port 14. Power button 15. Seat height L-handle 16. Seat post 17. Seat front-to-back adjustment knob 18. Seat 1. Console 2. Pad holder 3. Handlebar 4. USB port 5. Console post 6. Handlebar height L-handle 7. Pedal 8. Crank 9.
ACCESSORIES 5mm Allen wrench x 1 6mm Allen wrench x 1 15mm Open-end wrench x 1 M10 screws x 4 Bike stabilizer x2 Pedals x 2 Power adapter x 1 User Manual x 1 Pad holder x 1 (Pre-installed) Quality certificate x 1 PRODUCT SPECIFICATION Product Name: AI-Powered Exercise Bike Mode No.: R-Q002 Display: LED nixie tube Wireless Connection: Bluetooth Equipment Type: Pedal exerciser Braking: Non speed-dependent Resistance: Smart motor damping Drive: Belt drive Power Adapter: Input: AC 100-240V, 0.
SETTING UP YOUR BIKE 1. Install bike stabilizers Place the front and rear stabilizer as indicated, install four M10 screws and tighten them with a 6mm Allen wrench. 2. Connect the tube Connect the tube inside the handlebar to the one inside the console post. Pay attention to the direction when inserting. 3. Mount the handlebar 1 2 With the tube well connected, mount the handlebar to the console post. Lock 4 M6 screws with a 5mm Allen wrench.
INSTALL THE PEDALS L Install the pedal straps Mount the pedal strap with L sign to the left pedal and the one with R sign to the right pedal. L L L R R Mount the pedal with L sign to the left side crank, fastening it with a 15mm open-end wrench in an anti-clockwise direction. Mount the pedal with R sign to the right side crank, fastening it with a 15mm open-end wrench in a clockwise direction.
HANDLEBAR HEIGHT ADJUSTMENT 2 3 4 1 5 1. Turn the handlebar height L-handle counterclockwise to loosen the console post. 2. Adjust the handlebar to a proper height. 3. Turn the L-handle clockwise to tighten. 4. Pull the L-handle outwards. 5. Turn the L-handle to a vertically downward direction. SEAT HEIGHT ADJUSTMENT Maximum height For your safety, make sure to keep the STOP mark inside the frame while adjusting the seat height.
SEAT HEIGHT ADJUSTMENT 4 2 3 5 1 Height adjustment 1. Turn the seat height L-handle counterclockwise to loosen the seat post. 2. Adjust the seat height until you feel comfortable. 3. Turn the L-handle clockwise to fix the seat post. 4. Pull the L-handle outwards. 5. Rotate the L-handle to a vertically downward direction. Caution: It is important to keep the L-handle vertically downwards as projecting handles will interfere with your movements.
SEAT DEPTH ADJUSTMENT Seat depth adjustment Turn the knob clockwise to loosen. Move the seat forward or back. Turn the knob counterclockwise to tighten. Stabilize your bike There are four leveling feet on the front and rear stabilizers. Rotate each leveling foot until the bike rests firmly on the floor.
FUNCTIONS Power Switch Power Port Power port Connect the power adapter to the power port as indicated and connect the power plug to a suitable socket; turn the power button to “-” position to power on. Console The console works by either rotating its metal frame or pressing the knob. Units: N.
HOW TO USE THE CONSOLE Bluetooth ON Turn on AI Gym App and search your bike to connect. When connected, the Bluetooth indicator on the console stays on. Bluetooth OFF Touch the bottom middle area of the console to enter Bluetooth interface. Press and hold the knob to turn it off. When disconnected, you will need to manually reconnect your bike in the App.
DATA DISPLAY AND SWITCH Duration Resistance(Gear) N·m Power Cadence w r/min Each slight touch at the bottom middle area of the console panel will change data display. Press the knob to control When you are taking a riding course or an immersive road riding on the App, press the knob to pause (when paused, the indicating lines flash); Press the knob again to retrieve; Press and hold the knob to end riding (when ended, the indicating lines keep displayed).
AI GYM APP INTRODUCTION About the App Via Bluetooth connection, AI Gym App helps record your workout data on the bike, enabling a visible analysis and tracing of your riding. AI Gym App offers a variety of online courses that meet different training goals, bringing you professional and scientifically effective fitness guidance. 1. Search and download "AI Gym “ in the Apple App Store or Google Play. AI Gym 2. Sign up or Log in Use your email address to register and create a new account, then log in.
3. Add device or unbind device Click “Add device” to search for the device you want, wait for search to complete. After the search is complete, select the correct device for binding. Once the device is bound, you can view the detailed information about the device. You can also edit the name or unbind the device.
4. Help and feedback When using the APP or device, you can view more user guides on the Help page. If you have suggestions for us or encounter difficulties, you can contact us by email or call the customer service hotline. ZWIFT APP INTRODUCTION Zwift is virtual training for running and cycling. Smash your goals and compete with others around the world. With structured workouts and social group rides. 1. Log in with Zwift user account, select POWER SOURCE on the main interface.
2. After click “POWER SOURCE”, the device list interface will pop up, select our device name, and click “OK”. 3. After the pairing is successful, click “Let's Go” to start. Then enjoy your ride.
DECLARATION We’ve tried to include all functions and necessary instructions while printing this manual. However, due to hardware and software improvement as well as design optimization from time to time, there still may be discrepancies between this manual and the product you buy. The actual product shall be referred to in case of any discrepancies in appearance, interface and color etc. DAILY STORAGE AND MAINTENANCE 1. This bike is for indoor home use only.
TROUBLESHOOTING Solution Problem Noise while pedaling Wobbly handlebars Unstable bike seat Unstable bike No display on console Failure with Bluetooth connection Failure with APP connection 1. Remove the pedals from the cranks, turn the pedal axis, in case of smooth turning, mount the pedals back. Consult the service personnel for replacement in case of unsmooth turning of the pedal axis. 2. Rotate the cranks. Tighten the crank screws in case of noise. 1.
CUSTOMER SERVICE We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within the 24 business hours. Tel: +1 (844)417-0149 Monday-Friday: 9:00-16:30 PST Email: support@renpho.com Web: www.renpho.com WARRANTY (1-YEAR PERIOD) The manufacturer's warranty is void under the following circumstances but not limited to: � Improper or inadequate maintenance or modification.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
JOICOM CORPORATION 165 E. Freedom Ave., Anaheim,CA 92801 Shenzhen Runfeng Digital Technology Co.
