Instruction Manual

Instruction Manual Dual AutoGate Connect / 2022 Version 3 (GSD-100763)
Page 11
Changing the Battery
1) Remove the battery cover
by pushing the clip
1) Remove the old battery
and recycle.
1) Push the button to ensure
that any remaining charge
on the board is discharged
before plugging the new
battery into the board.
Alkaline batteries should be disposed of in accordance with local, national or state
regulations, or recycled where such facilities exist. It is recommended that battery
packs are replaced every 12 months, irrespective of use, to ensure that they are
fit for purpose. Exhausted batteries are to be removed from the Dual AutoGate
and disposed of as above.
Noye: the technician will need to complete a reset after changing the battery - see
Installing the Dual AutoGate and Technician reset of the Dual AutoGate page 9.