Instruction Manual

Instruction Manual Dual AutoGate Connect / 2022 Version 3 (GSD-100763)
Page 5
Product Description
Dual AutoGate Connect is a battery powered unit that has been designed to detect rats and mice and
provides a barrier between the entry section of a bait box and the bait section. Dual AutoGate Connect units
have two sets of infrared emitters which continuously pulse light, and are reflected off the rodent's fur,
bouncing back to the infrared detectors. The higher sensors are used to detect rats and if the beams from
both detectors are broken simultaneously then this counts as one trigger. The lower sensors are used to
detect small rodents and if the beams from both detectors are broken within one second of each other then
this counts as a trigger. Once the sensor is triggered 3 times, with at least a five minutes of no trigger activity,
the gate will open allowing the rats to access the bait in the bait section of the box. The advanced settings
enable the installer to configure the device to cover a range of different circumstances and conditions.
Note: Please refer to page 13 - "Advanced Settings" for more information
Note: Five minutes of no activations is required to re-arm the sensors to ensure that the gate is not triggered
three times by one visiting rodent.
Dual AutoGate Connect features a motorised door capable of opening and closing. This enables the bait to be
isolated again after the baiting period by automatically closing again after, for example 5 days. There is also
an enhanced display that enables the technician to view, for example, number of days since baiting started,
number of activations and battery level.
The Dual AutoGate Connect units will fit into FT150 and FT155 bait boxes (shown below).
Accessory Bait
Tray 304978
shown fitted to
FB155 Bait Box to
support US
Market