User Instructions

6English

5 English

Download and Launch the Reolink App or Client software, and follow the

onscreen instructions to ﬁnish initial setup.

Set up the Camera

Camera Connection Diagram

Before using the camera, please connect your camera as instructed

below to ﬁnish initial setup.

1. Connect the camera to a PoE injector with an Ethernet cable.

2. Connect the PoE injector to your router, and then power on the

PoE injector.

NOTE: The camera should be powered with a 12V DC adapter or a PoE

poweringdevice such as PoE injector, PoE switch or Reolink NVR

(not included in the package).

Ethernet Cable

PoE IP Camera

Power Adapter

Router

PoE Injector*

• On Smartphone

• On PC

Scan to download the Reolink App.

Download path of the Reolink Client: Go to https://reolink.com > Support

> App & Client.

*You may also connect the camera to a PoE switch or Reolink PoE NVR.

NOTE: If you are connecting the camera to a Reolink PoE NVR,

please set up the camera via the NVR interface.

Available on the