User Instructions

Installation Tips

• Do not face the camera towards any light sources.

• Do not point the camera towards a glass window. Or, it may result

in poor image quality because of the window glare by infrared LEDs,

ambient lights or status lights.

• Do not place the camera in a shaded area and point it towards a

well-lit area. Or, it may result in poor image quality. To ensure best image

quality, the lighting condition for both the camera and the capture object

shall be the same.

• To ensure better image quality, it’s recommended to clean the lens

with a soft cloth from time to time.

• Make sure the power ports are not directly exposed to water or

moisture and not blocked by dirt or other elements.

• With IP waterproof ratings, the camera can work properly under

conditions like rain and snow. However, it doesn't mean the camera

can work underwater.

• Do not install the camera at places where rain and snow can hit the

lens directly.

• The camera may work in extreme cold conditions as low as -25°C

because it will produce heat when powered on. You may power the

camera indoors for a few minutes before installing it outdoors.

Mount the Camera

8English7 English

Drill holes in accordance with the

mounting hole template.

NOTE: There are two dierent types of mounts for bullet cameras.

Please check out the mount included in the package and follow the

corresponding instruction to install the camera properly.

NOTE: Use the drywall anchors

included in the package if needed.

NOTE: Run the cable through the

cable notch on the mount base.

Install the mount base with the

mounting screws included in

the package.

Install the Camera