What's in the Box 2 Introduce the NVR 3 Introduce the Cameras 4 Connection Diagram 7 Set up PoE NVR System 9 Mount Tips for the Cameras 10 Troubleshooting n Specifications 12 Notification of Compliance 12 1 | English Bld o« OF i NVR Bullet or Dome Camera Pock ‘Waterproof of Screws Lid m 8m NVR USB Mouse HDMI Cable Network Cable Network Cable Power Adapter [ad 24 HOUR nm kL Surveillance Card ~~ Quick Start Guide Mounting Hole Template NEGATE Quantity of devices and accessories vary by different models that y
IR Receiver USB Port Power LED HDD LED CONT) PAN@I ores USB Port Power Switch Audio Out Power Input HDMI Port VGA Port LAN Port PoE Interface TINE! The actual appearance and components may vary with different products. 3 | English Infrared Lights Lens Daylight Sensor BU-IN MIC -venison iTS TELEPROMPTER LIA «cco ree oesmoninnnieian eee nai Network Cable Reset Button * Press for about 10 seconds to restore factory settings.
5 | English Metal Case sees Lens Infrared Lights Daylight Sensor Built-in Mic Mount Metal Case Built-In Mic Note » Different types of cameras are Introduced In this section. Please check out the camera Included In the package and check out the details from the corresponding Introduction above. » The actual appearance and components may vary with different model of product.
To ensure all components work properly, it is recommended that you connect every part and try to run the system before a final Installation. Connect cameras to PoE ports on the NVR. Connect the NVR (LAN port) to your router with a network cable. Next, connect the mouse to the USE port of the NVR. Connect the NVR to a power outlet and turn on power switch. Connect the NVR to the monitor with a VGA or HDMI cable. NOTE: There Is no VGA NOTE: Some Interlink WIFI comers also work with Interlink PoE NVR.
A setup wizard will guide you through the NVR system configuration process. Please set a password for your NVR (for the Initial access) and follow the wizard to configure the system. GITE: The password should be at least 6 characters. It Is recommended that you note down the password and keep It In a secure place. Access the System via Smartphone or PC Download and launch the Interlink App or Client software and follow the Instructions to access the NVR. * On Smartphone Scan to download the Interlink App.
No video output on the monitor/TV If there's no video output on the monitor from Interlink NVR, please try the following solutions: * TV/monltor resolution should be at least 720p or above, * Make sure your NVR Is powered on. * Double check the HDMI/VGA connection, or swap another cable or monitor to test.
harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources,please recycle It responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling. promote the sustainable reuse of material resources, please recycle It responsibly.
Montagesockel Montagesockel Infrarot-LEDs Objektiv Infrarot-LEDs Tageslichtsensor Objektiv Internes Mikrofon Tageslichtsensor Internes Mikrofon hn Montagesockel Wasserdichter Deckel «vv no enervieren MA © © Metallgehäuse Netzwerkkabel > 8 Reset-Taste le Objektiv * Zum Zurücksetzen auf die Werkseinstellungen ca. 10 Sekunden lang drinstecken.
9 Montagesockel Metallgehäuse Internes Mikrofon Infrarot-LEDs Objektiv Tageslichtsensor HINWEIS: + In diesem Abschnitt werden verschiedene Kameratypen vorgestellt. Bitte Begriffenen Sle die Im Paket enthaltene Kamera und die Details aus der oben gegebenen entsprechenden Einführung. + Das Aussehen und der Lieferumfang der Kamera Kinnen Je nach dem Produktmodell verlieren.
Schulleben Sle die Kameras an die Pol-Ports des Invers an. Schlieren Sle den NVR an eine Steckdose an und schalten Sle den Stromschalter ein. Link PoE NVR zusammen 7: und geben HINWEIS! Einige Verlink WLAN Kameras kennen auch mit funktionieren. Wettere Informationen finden Sle unter Sle Maske Verlink WIKI Kameras Werk wich Verlink Po-NVRs en. 21 | Deutsch EIn Setup-Wizard wird Sie durch den Konfigurationsprozess des NVR Systems fuhren.
2 = Richten: Sle die Kamera nicht auf Lichtquelle. + Richten: Sle dle: Kamera nicht auf dos Glasfenster. Es: kann sonst zu schlechter Qualitativ fahren, da dos Fenster durch: Infrarot-LEDs; Umgebungslichter oder Statuslichter geblendet wird: » Platzieren Sle die Kamera nicht in ‘einem Schattenbierelch und richten Sie sie nicht auf einen gut: beleuchteten: Bereich Es kann sonst zu schlechter: Bildqualität fahren.
Pas de sortie vidéo sur le moniteur Sill n'y a pas de sortie vidéo sur le moniteur du NVR Kremlin, essayez les solutions suivantes: * La résolution du téléviseur/moniteur dot être d'au moins 720p ou plus. » Assurez-vous que votre NVR est sous tension. * Vérifiez la connexion HDMI/VGA, ou changez de câble ou de moniteur pour le tester.
39 Élimination Incontrôlée des déchets ne nuls a l'environnement ou & la santé humaine, recyclez-les de maniérer responsable afin de promouvoir la réutilisation durable des ressources matérielles. Pour retourner votre appareil usage, veuillez utiliser les systèmes de retour et de collecte ou contacter le détallant oii le produit a été aches. lis peuvent prendre ce produit pour un recyclage sans danger pour environnement.
Base dl Montaggio Per garantire il corretto funzionamento dl tutti | componenti, si consiglia di collegare ogni parte e privare ad avviare 1 sistema prima dl un‘installazione finale. Allogamento Metallico Microfoni Incorporate Collegare INVEIR (porta LAN) al utero con un cavo di Internet. Collegare in seguito il mouse alla porta USB delinear. Luc a Infrarossi Obiettiva Sensore Luce Diurna Collegare 'NVR al monitor con un cavo VGA o DIMMI. Asia + Ci sono diversa tip! dl telecamere presentate In questa parte.
Para garantizar que todos los componentes funcionen correctamente, se recomienda que conecte Conecte las cámaras a los todas las partes e intente ejecutar el sistema antes de finalizar la instalación. puertos PoE en el NVR, Conecte el NVR (puerto LAN) a su enrubiador con un cable de Internet. Luego, conecte el retén al puerto USB del NVR. Conecte el NVR a una toma de corriente y encienda el Interruptor encendido. Conecte el NVR al monitor con un cable VGA o DIMID.
Un asistente de configuración lo guardar durante el proceso de configuración del sistema NVR. Establezca una contrasentido para su NVR (para el acceso Inicial) y siga el asistente para configurar el sistema. NOTA La contrasentido debe ser de al menos 6 caracteres. Es recomendable anotar la contrasentido y guardaría en un lugar segura. Acceder al NVR a través de Teléfono Inteligente 0 Computadora Descargue e Nicle la aplicación Remoline o el software de Clienta y siga las instrucciones para acceder al NVR.
X Deshecho Correcto de este Producto Esta marca indica que este producto no debe desecharse con otros desechos domésticos en toda la UE Para evitar posibles dacios al medio ambiente o la salud humana derivados de la eliminación no controlada de resides, recicle lo de manera responsable para promover la reutilizarla sostenible de los recursos materiales. Para devolver su dispositivo usado, utilice los sistemas de devolución y recolección o comuníquese con el vendedor donde comprad el producto.