EN /D E PoE IP Camera Technical Support Quick Start Guide For Windows Client & Mac Client, please download the PC software: https://reolink.com/software-and-manual/ For advanced setup, please download the user manual: https://reolink.com/software-and-manual/ For more troubleshooting, please go to FAQs on our website: https://reolink.com/faqs/ For other technical support, please contact us at support@reolink.
General Introduction English 3 Deutsch 15 Welcome to Reolink Easy Setup Within Minutes! 2 English English 3
Camera Connection Diagram 01. PoE IP Camera Network Cable Your Smart Device PoE Switch/Injector Power Adapter Router Network Cable Access the Camera by Smartphones For initial setup, please connect the camera to your PoE injector/switch with an Ethernet cable, and then follow the steps below to set up your camera. Make sure that your camera and your smart devices are in the same network.
Install Reolink App 1 In LAN There are two ways to get the Reolink App: 1. Search “Reolink” in App Store (for iOS), or Google Play (for Android), download and install the app. 2. Scan the QR code below to download and install the app. Reolink-5G Available on the 1. Connect your smartphone to the WiFi network of your router. Add the Device 1 When in LAN (Local Area Network) The camera will be automatically added.
Front Door Front Door 2. Launch Reolink App. The camera will automatically display in the camera list in LAN. 3. Tap screen to sync the time and create your password. 4. Start live view or go to “Device Settings” for more configurations.
2 In WAN Front Door Add New Device 3. Name your camera, create a password, and then start live view. This icon only displays if the camera supports 2-way audio. This icon only displays if the camera supports pan & tilt (zoom). 1. click ’+‘ on the up right corner. 10 English 2. Scan the QR code on the camera, and then tap “Login”. (There is no password at the factory default status.
Install Reolink Client 02. Access the Camera by Computer Please install the client software from our official website: https://reolink.com/software-and-manual. Start Live View Launch the Reolink Client software on the PC. By default, the client software will automatically search the cameras in your LAN network and display them in the “Device List” on the right-side menu. Device list Front Door State: login success Click the “Start” button, and you can view the live streaming now.
Add the Device Alternatively, you can manually add the camera to the client. Please follow the steps below. Device list Camera1 Stae: login success Add Device Device Basic Infomation Device Name User Name 2 admin Scan Device In LAN NO. Device Name 1 Camera1 Media Port 9000 Camera1 Register Mode IP Address 5 IP Address 192.168.10.10 4 Password ****** OK 1 Cancel IP Address Port Mac Addr 192.168.10.
Anschlussplan der Kamera PoE IP-Kamera Netzwerkkabel Ihr Smart Device PoE-Switch/-Injektor Netzadapter Router Netzwerkkabel Danke, dass Sie sich für Reolink entschieden haben. Einfache Installation in wenigen Minuten! 16 Deutsch Verbinden Sie die Kamera durch ein Ethernet-Kabel mit dem PoE-Switch/-Injektor und befolgen Sie danach folgende Schritte, um die Kamera einzurichten. Stellen Sie sicher, dass sich die Kamera und Ihre Smart Devices mit demselben Router verbinden.
Reolink App installieren Es gibt zwei Möglichkeiten, die Reolink App herunterzuladen: 01. Kamerazugriff via Smartphones 1. Suchen Sie im App Store (für iOS) oder in Google Play (für Android) nach „Reolink“, führen Sie den Download durch und installieren Sie die App. 2. Scannen Sie den unten abgebildeten QR-Code, um den Download durchzuführen und die App zu installieren. Available on the Gerät hinzufügen 1 Bei einer LAN-Verbindung (Lokales Netzwerk) Die Kamera wird automatisch hinzugefügt.
1 Im LAN Front Door Reolink-5G 1. Verbinden Sie Ihr Smartphone mit dem WLAN Ihres Routers. 20 Deutsch 2. Starten Sie die Reolink App. Bei einer LAN-Verbindung wird die Kamera automatisch in der Geräteliste angezeigt.
2 Im WAN Front Door Neues Gerät hinzufügen 3. Tippen Sie auf den Bildschirm, um die Zeit zu synchronisieren und Ihr Passwort zu erstellen. 4. Starten Sie die Live-Ansicht oder gehen Sie zu „Geräteeinstellungen“, um weitere Konfigurationen vorzunehmen. 1. Klicken Sie oben rechts auf „+“. 22 Deutsch 2. Scannen Sie den QR-Code auf der Kamera und tippen Sie auf „Einloggen“. (Bei der Werkseinstellung gibt es kein Passwort.
Front Door 02. 3. Benennen Sie Ihre Kamera und erstellen Sie ein Passwort. Gehen Sie dann zur Live-Ansicht. Kamerazugriff via Computer Dieses Symbol wird nur angezeigt, wenn die Kamera 2-Wege-Audio unterstützt. Dieses Symbol wird nur angezeigt, wenn die Kamera Pan & Tilt (Zoom) unterstützt. Dieses Symbol wird nur angezeigt, wenn die Kamera (4MP oder höhere Version) Clip-Funktion unterstützt.
Reolink Client installieren Gerät hinzufügen Sie können die Client-Software auf der folgenden Website herunterladen: https://reolink.com/de/software-and-manual/. Alternativ können Sie die Kamera manuell zur Client-Software hinzufügen. Befolgen Sie dazu bitte die folgenden Schritte: 06/03/2018 23:48:13 TUE 5 2 411-5MP 4 1 3 06/03/2018 23:48:13 TUE Live-Ansicht starten Starten Sie die Reolink Client-Software auf dem PC.