Version: V1.00.
All-In-One User Manual Trademarks asTech is a registered trademark of Repairify, INC. in the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information Copyright © 2022 by asTech, INC. (also called asTech for short). All rights reserved.
asTech All-In-One User Manual Use as intended only. Do not modify. Inspect before every use; do not use if parts are loose or damaged. Do not place the tool on any unstable surface. Handle the tool with care. If the tool is dropped, check for breakage and any other conditions that may affect its operation. Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
asTech All-In-One User Manual Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity. When reconnecting the ECU harness connector, be sure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged. Using This Manual This manual contains device usage instructions.
asTech All-In-One User Manual Table of Contents 1 Introduction .................................................................................................................................................... 1 1.1 Product Profile ............................................................................................................................ 1 1.2 Package List ...............................................................................................................................
asTech All-In-One User Manual 6.5 Tire Pressure Monitor System Reset ............................................................................................ 24 6.6 Gear Learning ............................................................................................................................. 25 6.7 Anti-theft Matching ...................................................................................................................... 25 6.8 Injector Coding ................................
asTech All-In-One User Manual 1 Introduction 1.1 Product Profile All-In-One is a powerful Android-based diagnostic tool, which has several production configurations ranging from commercial vehicle to passenger vehicle. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
asTech All-In-One User Manual Display tablet x 1 Indicates the test result. asTech Connect (VCI) device x 1 Collects vehicle data and sends it to the tablet for analysis. Power adaptor x 1 Charges the tablet via the AC outlet. Diagnostic cable x 1 Connects the asTech Connect device to the OBD II vehicle’s DLC. Charging cable (Type A-Type C) x 1 Connects the tablet to a PC for data exchange/backup. Data cable (Type A-Type B) x 1 • Connects the asTech Connect device to PC for J2534 reprogramming.
asTech All-In-One User Manual 1.3 Components & Controls There are two main components to the diagnostic system: Display Tablet – the central processor and monitor for the system (See Chapter 1.3.1). asTech Connect Device – the device for accessing vehicle data (See Chapter 1.3.2). 1.3.1 Display Tablet The tablet acts as the central processing system, which is used to receive and analyze the live vehicle data from the asTech Connect device and then output the test result.
asTech All-In-One User Manual 1. Microphone 2. Type-A USB Port • Connect to the asTech Connect device to perform vehicle diagnosis via the USB cable Connect to compatible add-on modules (such as Videoscope) or USB storage devices. 3. Connect to PC type-c USB Port for data exchange/backup. 4. Front Camera 5. POWER Key In Off mode, press it for 3 seconds to turn the tablet on. In On mode: • Press it once to activate the LCD if the LCD is off. Press it once to turn off the LCD if the LCD lights up.
asTech All-In-One User Manual 7. Audio Speaker 8. Rear Camera 9. Adjustable stand Flip it out to any angle and work comfortable at your desk, or hang it on steering wheel. 1.3.2 asTech Connect Device The asTech Connect device features powerful functions and it can be applied in the following situations: 1).
asTech All-In-One User Manual Warning: The asTech Connect device obtains power through the vehicle's DLC, and it is prohibited to connect to an external DC power supply. No responsibility can be assumed for any damage or loss caused as a result of not strictly following the above method. 5. Data I/O port • Connect the asTech Connect device to the tablet to perform vehicle diagnosis. • Connect the asTech Connect device to the PC when as a J2534 PassThru device. 1.4 Technical Parameters 1.
asTech All-In-One User Manual 2 Initial Use 2.1 Charging & Turning On 1. Plug one end of the included charging port of the tablet, and the other end to the power adaptor. 2. Connect the other end to the AC outlet. appears on the screen, it indicates it is being charged. If the logo changes into If the battery is fully charged. Unplug the power adaptor from the tablet.
asTech All-In-One User Manual VCI Connection: Shows whether the VCI device is properly connected or not. Screenshot: Captures the current screen. Back: Returns to the previous screen. 2.4 Adjust Brightness Note: Reducing the brightness of the screen is helpful to conserve the battery power. 1. On the home screen, tap Settings -> Display -> Brightness level. 2. Drag the slider to adjust it. 2.5 Change System Language The tool supports multiple system languages.
asTech All-In-One User Manual 3 Register & Update 3.1 Register & Update For initial use, the registration is the necessary first procedure to activate the tool. Tap the application icon on the home screen to asTech it, and then tap Login on the upper right corner of the screen to enter the following screen. (If you are a new user, follow A to proceed.) (If you have registered to be a member, go to B to login the system directly.) (If you have bound a sub-account to this tool, go to C to login the system.
asTech All-In-One User Manual Input the 12-digit Product Serial Number and 8-digit Activation Code (can be obtained from the password envelope), and then tap Activate. Tap Yes to navigate to the update center to update all available software. Tap No to ignore it. In this case, follow Chapter 8 to check for updates.
asTech All-In-One User Manual asTech. The system consists of asTech Connect VCI, asTech Complete and Tool Side Device VCI. • asTech Connect VCI: For technicians seeking technical assistance and additional expertise on various vehicle issues. • asTech Complete: For asTech Connect posting assistance request and Tool Side Device accepting order. • Tool Side Device VCI: For service provider or master technician providing technical assistance service.
asTech All-In-One User Manual 4 Connections 4.1 Preparation Normal testing conditions The ignition is turned on. The vehicle battery voltage range is 9-14V or 18-30V. The throttle is in closed position. Find DLC location: For passenger cars, the DLC(Data Link Connector) is usually located 12 inches from the center of the instrument panel, under or around the driver’s side for most vehicles. For some vehicles with special designs, the DLC location may vary.
asTech All-In-One User Manual For non-OBDII vehicles, proceed as follows: Note: If the power supply on vehicle diagnostic socket is insufficient or the power pin is damaged, you can get power via either of the following ways: A. Via Battery clamps cable: Connect one end of the battery clamps cable to the power jack of the OBD I adaptor box, and the other end to the vehicle’s battery. B.
asTech All-In-One User Manual 5 Diagnosis 5.1 Diagnostics Through simple Bluetooth communication between the display tablet and asTech Connect device, you can easily get the VIN (Vehicle Identification Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve it from the remote server and then guide you to vehicle information page without the necessity of step-by-step manual menu selection.
asTech All-In-One User Manual • Tap View record to view the details of the current diagnostic report. • To perform other functions, tap Quick access to directly go to the diagnostic function selection screen. Choose the desired one to start a new diagnostic session. B. If the tablet failed to access the VIN information, the screen will display as below: • Tap the input field to directly, tap OK. If the VIN exists on the remote server, the system will enter the diagnostic function selection screen.
asTech • Tap All-In-One User Manual to input the VIN manually if the tablet has failed to identify the VIN of the vehicle. • Tap to scan the VIN barcode. If the VIN barcode cannot be recognized, please manually input the VIN. • Tap to scan the VIN character. If the VIN character cannot be recognized, please manually input the VIN. Note: In general, vehicle identification numbers are standardized - all contain 17 characters.
asTech All-In-One User Manual 5.2 Remote Diagnostics This option aims to help repair shops or technicians asTech instant messaging and remote diagnosis, making the repair job getting fixed faster. Tap Remote Diagnostics on the Job menu, the screen appears blank by default. 5.2.1 Interface Layout 5.
asTech All-In-One User Manual • Tap certain vehicle model to view the details of the last diagnostic report. • To delete certain diagnostic history, select it and then tap Delete. To delete all historical records, tap Select All and then tap Delete. • Tap Quick Access to directly navigate to the function selection page of last diagnostic operation. Choose the desired option to proceed. 5.4 Report This option is used to view, delete or share the saved reports.
asTech All-In-One User Manual 6 Service Function (Reset) This module provides an easy dial to quickly access the most commonly performed service functions. It offers coding, reset, relearn and more service functions, to help vehicles get back to functional status after repair or replacement. 6.
asTech All-In-One User Manual 1. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL. 2. Tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and tire is replaced for the car with tire pressure monitoring function. 6.
asTech All-In-One User Manual It needs to be performed in the following cases: 1. The exhaust back pressure sensor is replaced. 2. The PM trap is removed or replaced. 3. The fuel additive nozzle is removed or replaced. 4. The catalytic oxidizer is removed or replaced. 5. The DPF regeneration MIL is on and maintenance is performed. 6. The DPF regeneration control module is replaced. 6.
asTech All-In-One User Manual 6.16 EGR Adaption This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced. 6.17 Seats Calibration This function is applied to match the seats with memory function that are replaced and repaired. 6.18 Windows Calibration This function is used to perform door window matching to recover the ECU initial memory, and recover the automatic ascending and descending function of power window. 6.
asTech All-In-One User Manual 7 Software Update This module enables you to update the diagnostic software & App and frequently used software. 7.1 Update Diagnostic Software & APP Go to Software Update on the Job Menu and tap the Downloaded tab. The Available tab displays a list of software that can be updated. Under it, all software is categorized into three kinds: • Common software: mainly includes some common apps that are associated with the diagnostic app.
asTech All-In-One User Manual Tap Update to start downloading. Once download is finished, the software packages will be installed automatically.
asTech All-In-One User Manual 8 User Info This function allows users to manage personal information and VCI. 8.1 VCI This option allows you to manage all activated VCI devices. If several VCI devices are activated on this tool, a list of VCIs will be displayed on the screen. Once you choose the VCI device that belongs to other account, you have to log out, and then input the right account to continue. 8.
asTech All-In-One User Manual 8.9 Profile Use this item to view and configure personal information. • Tap the user image to change it. • Tap > next to Upgrade Period to check the due date of all diagnostic software. 8.10 Change password This item allows you to modify your login password. 8.11 Settings It enables you to make some application settings and view software version information etc. 8.11.1 Units It is designed to configure the measurement unit. Metric System and English System are available.
asTech All-In-One User Manual For asTech Wi-Fi printer, follow the User Manual included with the printer to configure it. For other Wi-Fi printers, Before printing, make sure the following conditions are met: • The Wi-Fi printer is powered on and working normally. • The print service plug-in associated with the printer is already installed on the tablet (Go to Google Play or use the Browser to download and install it). Follow the steps below to proceed: 1. Set the default printer as System. 2.
asTech All-In-One User Manual 6. Select the desired Wi-Fi printer from the list. If the chosen Wi-Fi printer hotspot is open, the tablet can connect it directly. If it is encrypted, a password may be required. Refer to the Wi-Fi printer user manual to get the default password. 7. Now the printer is ready for printing. 8. Alternatively, you can also choose Save as PDF to save the current diagnostic report as a PDF file for later printing. 8.11.
asTech All-In-One User Manual 9 Synchronization You can transfer media files, screenshots and APK between the PC and tablet. 1. Connect one end of the included charging/data cable to the charging/data I/O port of the tablet, and the other end to the USB port of the PC. 2. Swipe the tablet screen from the top, a pull-down option list will appear on the screen. 3. Tap Charging this device via USB, the following setting options will be displayed on the screen. 4.
asTech All-In-One User Manual 10 FAQ 10.1 About All-In-One 1. How to save power? 1. Please turn off the screen while the tool keeps idle. 2. Set a shorter standby time. 3. Decrease the brightness of the screen. 4. If WLAN connection is not required, please turn it off. 2. Communication error with vehicle ECU? Please confirm: 1. Whether the VCI device is correctly connected. 2. Whether ignition switch is ON. 3.
asTech All-In-One User Manual Please follow below steps to proceed in case you forgot the login password: 1. Tap the application icon on the home screen to asTech it. 2. Tap the Login button on the upper right corner of the screen. 3. Tap Retrieve password. 4. Input product S/N and follow the on-screen prompts to retrieve the password. 10.2 About asTech Connect. 1. What’s network conditions is required for asTech Diag.? The remote asTech Diag. operation requires a network broadband of 100 MB or above. 2.
asTech All-In-One User Manual 11 Glossary of Terms & Abbreviations ABS – Anti-Lock Brake System AC – Alternative Current ADAS -- Advanced Driver Assistance Systems AFS – Adaptive Front-lighting System CAN – Controller Area Network Communication Protocol – Allows different systems and sensors in a vehicle to communicate.
asTech All-In-One User Manual LCD – Liquid Crystal Display LED – Light Emitting Diode Manufacturer Specific Code – A DTC that applies only to OBD II-compliant vehicles made by a specific manufacturer. MIL – Malfunction Indicator Lamp The vehicle’s “Check Engine” warning light that activates when a DTC is stored.
asTech All-In-One User Manual Warranty This warranty is expressly limited to persons who purchase asTech® products for purposes of resale or use in the ordinary course of the buyer’s business. asTech All-In-One® electronic product is warranted against defects in materials and workmanship for one year (12 months) from date of delivery to the user.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
such as a device case and a device holster are not composed of metal components. Keep your device 0 mm away from your body to meet the requirement earlier mentioned. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.
