User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Using This Manual
- 1 Introduction
- 2 Initial Use
- 3 Register & Update
- 4 Connections
- 5 Diagnosis
- 6 Service Function (Reset)
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 Anti-theft Matching
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Matching
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 IMMO Programming
- 6.17 EGR Adaption
- 6.18 Seats Calibration
- 6.19 Windows Calibration
- 6.20 Transport Mode
- 6.21 Gas Particulate Filter (GPF) Regeneration
- 8 Software Update
- 11 User Info
- 12 Synchronization
- 13 FAQ
- 14 Glossary of Terms & Abbreviations
- Warranty
asTech All-In-One User Manual
7. Audio Speaker
8. Rear Camera
9. Adjustable stand
Flip it out to any angle and work comfortable at your desk, or hang it on steering wheel.
1.3.2 asTech Connect Device
The asTech Connect device features powerful functions and it can be applied in the following
situations: 1). When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with
the Diagnostics module of the tablet, which is used to obtain vehicle data, and then send it to the tablet
for analysis via Bluetooth / data cable.
2). When as a asTech Connect (Customer) VCI, it does not communicate with the tablet, but it needs to
work together with the asTech module of the tablet. The tablet is mainly used to issue remote
diagnostic requests, and the asTech Connect VCI is networked to receive and execute
commands from the remote Tool Side Device (Business).
Note: For detailed operations, please refer to Chapter 7.
3). When as a local or remote J2534 PassThru device, it can be used in conjunction with the PC
installed with OEM diagnostic software.
1. Touch screen
2. LAN/WAN port
Connect the asTech Connect device to the Internet.
3. OBD-16 diagnostic connector
Connect the asTech Connect device to the vehicle’s DLC (Data Link Connector) port via the Diagnostic
cable.
4. DC-IN power jack
Currently disabled and for manufacturer use only.
5