User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Using This Manual
- 1 Introduction
- 2 Initial Use
- 3 Register & Update
- 4 Connections
- 5 Diagnosis
- 6 Service Function (Reset)
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 Anti-theft Matching
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Matching
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 IMMO Programming
- 6.17 EGR Adaption
- 6.18 Seats Calibration
- 6.19 Windows Calibration
- 6.20 Transport Mode
- 6.21 Gas Particulate Filter (GPF) Regeneration
- 8 Software Update
- 11 User Info
- 12 Synchronization
- 13 FAQ
- 14 Glossary of Terms & Abbreviations
- Warranty
asTech All-In-One User Manual
Warning: The asTech Connect device obtains power through the vehicle's DLC, and it is prohibited to
connect to an external DC power supply. No responsibility can be assumed for any damage or loss caused as a
result of not strictly following the above method.
5. Data I/O port
• Connect the asTech Connect device to the tablet to perform vehicle diagnosis.
• Connect the asTech Connect device to the PC when as a J2534 PassThru
device.
1.4 Technical Parameters
1. Display tablet
Operating system: Android
Processor: 4-core 2.0GHz
Memory: 4GB
Storage: 128GB
Screen: 10.1 inch capacitive touch screen with a resolution of 1280 x 800 pixels
Camera: Front-facing 5.0MP camera + Rear-facing 8.0MP camera
Connectivity
• Wi-Fi (802.11a/b/g/n/ac) 2.4GHz/5GHz dual frequency
• Bluetooth
Working temperature: 0℃ ~ 50℃
Storage temperature: -20℃ ~ 70℃
2. asTech Connect device
Size: 204mm x 110mm x 45mm
Working voltage: DC 9~36V
Power consumption: ≤ 6W
Communication: Bluetooth/Wi-Fi or data cable connection
Working temperature: 0℃ ~ 50℃
6