User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Using This Manual
- 1 Introduction
- 2 Initial Use
- 3 Register & Update
- 4 Connections
- 5 Diagnosis
- 6 Service Function (Reset)
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 Anti-theft Matching
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Matching
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 IMMO Programming
- 6.17 EGR Adaption
- 6.18 Seats Calibration
- 6.19 Windows Calibration
- 6.20 Transport Mode
- 6.21 Gas Particulate Filter (GPF) Regeneration
- 8 Software Update
- 11 User Info
- 12 Synchronization
- 13 FAQ
- 14 Glossary of Terms & Abbreviations
- Warranty
asTech All-In-One User Manual
For asTech Wi-Fi printer, follow the User Manual included with the printer to configure it.
For other Wi-Fi printers,
Before printing, make sure the following conditions are met:
• The Wi-Fi printer is powered on and working normally.
• The print service plug-in associated with the printer is already installed on the tablet (Go to Google
Play or use the Browser to download and install it).
Follow the steps below to proceed:
1. Set the default printer as System.
2. Go to Other Modules -> Tablet Settings -> WLAN, set the WLAN switch to Off.
3. On the report details page, tap .
4. Touch next to Select a printer on the upper left corner of the screen.
5. Select All Printers -> Add printer and enable the installed printer service, the system starts
searching for all available Wi-Fi printers of the brand.
27