User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Using This Manual
- 1 Introduction
- 2 Initial Use
- 3 Register & Update
- 4 Connections
- 5 Diagnosis
- 6 Service Function (Reset)
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 Anti-theft Matching
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Matching
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 IMMO Programming
- 6.17 EGR Adaption
- 6.18 Seats Calibration
- 6.19 Windows Calibration
- 6.20 Transport Mode
- 6.21 Gas Particulate Filter (GPF) Regeneration
- 8 Software Update
- 11 User Info
- 12 Synchronization
- 13 FAQ
- 14 Glossary of Terms & Abbreviations
- Warranty
asTech All-In-One User Manual
10 FAQ
10.1 About All-In-One
1. How to save power?
1. Please turn off the screen while the tool keeps idle.
2. Set a shorter standby time.
3. Decrease the brightness of the screen.
4. If WLAN connection is not required, please turn it off.
2. Communication error with vehicle ECU?
Please confirm:
1. Whether the VCI device is correctly connected.
2. Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN number to us using Feedback
feature.
3. Failed to enter into vehicle ECU system?
Please confirm:
1. Whether the vehicle is equipped with this system.
2. Whether the VCI device is correctly connected.
3. Whether ignition switch is ON.
4. If all checks are normal, send vehicle year, make, model and VIN number to us using Feedback
feature.
4. How to reset the tablet?
Warning: Resetting may cause data loss. Before doing so, please make sure important data and information
has been backed up.
Do the following to reset the tablet:
1. Tap Settings -> System -> Reset options.
2. Tap Erase all data (factory reset).
3. Tap RESET TABLET.
4. Tap ERASE EVERYTHING to start resetting until the tool automatically reboots.
5. What to do if the language of vehicle diagnostic software does not match the system
language?
English is the default system language of the tool. After the system language is set to the preference
language, please go to the update center to download the vehicle diagnostic software of the
corresponding language.
If the downloaded diagnostic software is still displayed in English, it indicates that the software of the
current language is under development.
6. How to retrieve the login password?
30