User manual

25
Chapter 6 APPENDIX
6.1 AUXILIARY POWER CORD AND POWER ADAPTER
EN261RF 2.5” HDD enclosure allow you to install hard drive without auxiliary power, but if you
use a higher capacity drive, it may cause shortage of power from your USB port and make device
running unstable.
In this situation, there are two solutions to get more power supply for your high-powered hard drive.
One is to connect another twin USB extra power plug to one more free USB port another is using an
auxiliary external self-power adapter (optional).
The USB auxiliary power cord is thinner than a regular cable. The Picture showing below is
connecting an extra auxiliary power cord to another USB port for getting more power. However, you
can not only use this auxiliary USB plug to work your disk.
Using external AC switching power adapter, it provides a DC jack for external power adapter
application. Using external power adapter can bring enough power current for your device running
stabilized. You can refer to the following specification and buy from your local seller.
External switching power adapter specification:
1. Output Voltage/Current: DC 5V/1.5A
(Do not use an adapter that over DC 5V, it may damage your device.)
2. Plug type: Inner hole: 1.3∅