Instruction manual

Resfab Equipment Inc. CR-40F & CR-60F
MULTI PROGRAM CONTROLLER
HEAT O
SCREEN DISPLAY
UP ARROW
DOWN ARROW
MULTI PROGRAM
CONTROLER
INFORMATION
The Resfab's multi program controller can hold up to 40
different menus.
The 2 keys "IDLE ONE TEMP (250ºF)" and "IDLE
TWO TEMP (200ºF)" have been factory programmed.
To modify the set point temperature of these 2 keys, go
to section "Programmation of multi programme
controller", section "Modification of IDLE set point".
Use these keys to decrease the oil temperature when the
fryer is not going to be use for a while. In addition of
the energy saving, by using those keys, it will help to
increase the oil life and its quality.
! IMPORTANT
Temperature will increase of 25ºF per minute
approximately.
O
IDLE
ONE
TEMP
O
IDLE
TWO
TEMP
O
DOWN
O
UP
O
MENU
SELECT
O
START
/
STOP