Instruction manual

Resfab Equipment Inc. CR-40F & CR-60F
HEAT O
SCREEN DISPLAY
UP ARROW
DOWN ARROW
CHANGING IDLE ONE TEMP
AND IDLE TWO TEMP SET POINT
Resfab's multi program controller comes with 2 keys IDLE ONE TEMP and IDLE TWO TEMP.
These 2 keys are already factory preset at 250ºF for IDLE ONE TEMP and 200ºF for IDLE
TWO TEMP.
Those keys are used to decrease the oil temperature and maintain it at the IDLE set point. In addition of
the energy saving, by using the IDLE keys, it will increase the oil life and its quality.
To modify the IDLE temperatures, follow these instructions:
Choose the IDLE key to be modified. Press on the IDLE key (keep them pressed) and using the
UP or DOWN arrow, program the IDLE set point.
O
IDLE
ONE
TEMP
O
IDLE
TWO
TEMP
O
DOWN
O
UP
O
MENU
SELECT
O
START
/
STOP