Instruction manual

Resfab Equipment Inc. CR-40F & CR-60F

PROGRAMMING THE

MULTI PROGRAM CONTROLLER

HEAT O

SCREEN DISPLAY

UP ARROW

DOWN ARROW

Resfab's multi program controller offers the possibility to set up to 40 different menus. In addition of the

buzzer at the end of the cooking cycle, it is possible to set another buzzer at a chosen time during the

coking cycle. This option can be use or not. Following are the steps to set each menu and its possibilities.

At anytime the setting can be

interrupt by pressing the MENU

SELECT key.

MENU #1 (example)

Step 1- To access the menu mode:

At the same time, press the UP and DOWN keys for 5

seconds. A number (from 1 to 40) will appear at the right of the screen. Using the UP

or DOWN arrow, chose number 1. This indicates that menu #1 is ready to be set.

Step 2- Setting the temperature:

Press the IDLE ONE TEMP key to start the setting. Letters

StPt 1 and the temperature will blink alternately. Press again the IDLE ONE

TEMP key to chose / modify the temperature. Using the UP and DOWN keys, chose

the cooking temperature (example 350ºF). Set the temperature by pressing the IDLE

TWO TEMP key. StPt 1 and the number 350 (set temperature) will be display on

the screen. Press on the DOWN arrow to get to the next step, cooking time.

Step 3- Setting the cooking time:

Letters timE 1 will appear on the screen. Press the IDLE

ONE TEMP key to chose / modify cooking time. Number :00 will displayed on the

right of the screen. With the UP and DOWN arrows, select the cooking time (example

15 minutes). Set the cooking time by pressing the IDLE TWO TEMP key. timE 1 and

15:00(cooking time chosen) will display on the screen.

IDLE

ONE

TEMP

IDLE

TWO

TEMP

DOWN

SELECT

START

STOP